SMA6J10A Datasheet | STMicroelectronics

Features - Peak pulse power: - 600 W (10/1000 μs) - 4 k W (8/20 μs) - Stand-off voltage range from 5 V to 85 V - Unidirectional and bidirectional types - Low leakage current: - 0.2 µA at 25 °C - 1 μA at 85 °C - Operating Tj max: 175 °C - JEDEC registered package outline - Resin meets UL94, V0 plies with the following standards - UL94, V0 - J-STD-020 MSL level 1 - J-STD-002, JESD 22-B102 E3 and MIL-STD-750, method 2026 solderable matte tin plated leads - JESD-201 class 2 whisker test - IPC7531 footprint - JEDEC registered package outline - IEC 61000-4-4 level 4: - 4 k V - IEC 61000-4-2, C = 150 p F - R = 330 Ω exceeds level 4: - 30 k V (air discharge) - 30 k V (contact discharge) Description The SMA6J series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. This device is more generally used against surges below 600 W (10/1000 μs). The Planar technology makes it patible with high-end circuits where low leakage current and high junction temperature are required to provide long term reliability and stability. SMA6J devices are packaged in SMA (SMA footprint in accordance with IPC 7531 standard). DS5142 - Rev 10 - May 2022 For further information contact your local STMicroelectronics sales office. .st. SMA6Jxx A, SMA6Jxx CA Characteristics Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol PPP Tstg Tj TL Parameter Peak pulse voltage Peak pulse power...