SMP100LC-160 Datasheet | STMicroelectronics

® SMP100LC-xxx TELE EQUIPMENT PROTECTION: TRISIL™ Features s s s s s s Bidirectional crowbar protection Voltage range from 8V to 262V Low capacitance from 30 p F to 45p F typ @ 50V Low leakage current : IR = 2 µA max Holding current: IH = 150 m A min Repetitive peak pulse current : IPP = 100 A (10/1000µs) MAIN APPLICATIONS Any sensitive equipment requiring protection against lightning strikes and power crossing: Analog and digital line cards (x DSL, T1/ E1, ISDN...) Terminals (phone, fax, modem...) and central office equipment s s SMB (JEDEC DO-214AA) SCHEMATIC DIAGRAM DESCRIPTION The SMP100LC-xxx series is a low capacitance transient surge arrestor designed for the protection of high debit rate munication equipment. Its low capacitance avoids any distortion of the signal and is patible with digital line cards (x DSL, T1/E1, ISDN...). BENEFITS Trisils are not subject to ageing and provide a fail safe mode in short circuit for a better protection. They are used to help equipment to meet main standards such as UL1950, IEC950 / CSA C22.2 and UL1459. They have UL94 V0 approved resin. SMB package is JEDEC registered (DO-214AA). Trisils are UL497B approved (file: E136224) and ply with the following standards GR-1089 Core, ITU-T-K20/K21, VDE0433, VDE0878, IEC61000-4-5 and FCC part 68. July 2002 - Ed: 8C 1/8 SMP100LC-xxx IN PLIANCES WITH THE FOLLOWING STANDARDS STANDARD GR-1089 Core First level GR-1089 Core Second level GR-1089 Core Intra-building ITU-T-K20/K21 ITU-T-K20 (IEC61000-4-2) VDE0433 VDE0878 IEC61000-4-5 FCC Part 68, lightning surge type A FCC Part 68, lightning surge type B Peak Surge Voltage (V) 2500 1000 5000 1500 6000 1500 8000 15000 4000 2000 4000 2000 4000 4000 1500 800 1000 Required Minimum serial Voltage Current peak current resistor to meet Waveform waveform (A) standard ( ) 2/10 µs 10/1000 µs 2/10 µs 2/10 µs 10/700 µs 1/60 ns 10/700 µs 1.2/50 µs 10/700 µs 1.2/50 µs 10/160 µs 10/560 µs 9/720 µs 500 100 500 100 150 37.5 2/10 µs...