STMicroelectronics ST25TV512
the ST25TV02K/512 devices to an external coil. It is advised not to connect any other DC or AC path to AC0 or AC1. When correctly tuned, the coil is used to power and access the device using the ISO/IEC 15693 and ISO 18000-3 mode 1 protocols.| Part No. | ST25TV512 |
|---|---|
| Datasheet | ST25TV512 Download |
| Manufacturer |  STMicroelectronics |
| Description | RFID tag-IC |
| Buy | Stock & Price |
FEATURES
Contactless interface● Based on ISO/IEC 15693
● NFC Forum Type 5 tag certified by the NFC Forum
● Supports all ISO/IEC 15693 modulations, coding, subcarrier modes and data rates
● Custom Fast read access up to 53 Kbit/s
● Single and multiple block reads
● Single block writes
● Internal tuning capacitance: 23 pF, 99.7 pF
● Proprietary Inventory commands for speeding up the inventory process Memory
● Up to 2 Kbits of EEPROM
● RF interface accesses blocks of four bytes
● Write time from RF: typical 5 ms for one block
● Data retention: 60 years
● Minimum endurance: 100 k write cycles
● 16-bit event counter with anti-tearing Data protection
● User memory: two or three areas, read and/or write protected by two 32-bit encrypted passwords for three areas or one 64-bit encrypted password for two areas
● System configuration: write protected by a 32-bit encrypted password
● Permanent write locks at a block level Product identification and protection
● Kill mode and untraceable mode
● T...
