Datasheet4U Logo Datasheet4U.com

ST662A - DC-DC CONVERTER

General Description

The ST662A is a regulated charge pump DC-DC converter.

It provides 12V ± 5% output voltage to program byte-wide flash memory, and can supply 30mA output current from input as low as 4.75V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST60-40MF TVS SHINDENGEN
ST60-48MF TVS SHINDENGEN
ST6006 N Channel Enchancement Mode MOSFET Stanson Technology
ST601 PHOTOTRANSISTORS KODENSHI
ST60100 Silicon Dual Power Rectifier Microsemi Corporation

Other Datasheets by STMicroelectronics

Part Number Description
ST600K LOW VOLTAGE NPN POWER TRANSISTOR
ST619LB DC-DC CONVERTER REGULATED 5V CHARGE PUMP
ST6200C 8-BIT MCU
ST6201C 8-BIT MCU
ST6203C 8-BIT MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ST662A DC-DC CONVERTER FROM 5V TO 12V, 0.03A FOR FLASH MEMORY PROGRAMMING SUPPLY s s s s s s OUTPUT VOLTAGE: 12V ± 5% SUPPLY VOLTAGE RANGE: 4.5V TO 5.5V GUARANTEED OUTPUT CURRENT UP TO 30mA VERY LOW QUIESCENT CURRENT: 100mA LOGIC CONTROLLED ELECTRONIC SHUTDOWN: 1µA JUST CAPACITORS NEEDED (NO INDUCTOR) DIP-8 DESCRIPTION The ST662A is a regulated charge pump DC-DC converter. It provides 12V ± 5% output voltage to program byte-wide flash memory, and can supply 30mA output current from input as low as 4.75V. A logic controlled shut down pin that interfaces directly with microprocessor reduces the supply current to only 1µA.