STA8089GA Datasheet | STMicroelectronics

Features - AEC-Q100 qualified - STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, Bei Dou and QZSS systems - ST DRAW (Dead Reckoning Automotive Way) supported (STA8089GAD Only) - Pin to pin patible with STA8088GA - Single die standalone receiver embedding RF Front-End and low noise amplifier - -162 d Bm indoor sensitivity (tracking mode) - Fast TTFF < 1 s in Hot start and 30 s in Cold Start - High performance ARM946 MCU (up to 196 MHz) - External SQI Flash interface - 256 Kbyte embedded SRAM - Real Time Clock (RTC) circuit - 32-bit Watch-dog timer - 2 UARTs - 1 I2C master/slave interface - production data - USB2.0 full speed (12 MHz) with integrated physical layer transceiver - 2 Controller Area Network (CAN) - 2 channels ADC (10 bits) - Operating condition: - Main voltage regulator (VINL): 1.8 V ± 5% - Backup voltage (VINB): 1.6 V to 4.3 V - Digital voltage (VDD): 1.1 V to 1.32 V - RF core voltage (VCC): 1.2 V ± 10% - IO Ring Voltage (Vdd IO): 1.8 V ± 5% or 3.3 V ± 10% - Package: - VFQFPN56 (7 x 7 x 1.0 mm) 0.4 mm pitch - Operating temperature range: -40/+85°C Description STA8089GA belongs to Teseo III family products. STA8089GA is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/Bei Dou/QZSS). STA8089GA is pliant with ST Automotive Grade qualification which includes in addition to AEC-Q100 requirements a set of production flow methodologies targeting zero defect per million. STA8089GA, fulfilling high quality and service level requirements of the Automotive market, is the ideal solution for in-dash navigation and OEM telematics applications. The device is offered with a plete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output. STA8089GAD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware. December 2022 This is information on a product in full...