STGIPN3H60T-H
STGIPN3H60T-H is IGBT manufactured by STMicroelectronics.
Features
- IPM 3 A, 600 V, 3-phase IGBT inverter bridge including control ICs for gate driving and freewheeling diodes
- Optimized for low electromagnetic interference
- VCE(sat) negative temperature coefficient
- 3.3 V, 5 V, 15 V CMOS/TTL input parators with hysteresis and pull-down/ pull-up resistors
- Undervoltage lockout
- Internal bootstrap diode
- Interlocking function
- Shutdown function
- parator for fault protection against overtemperature and overcurrent
- Op-amp for advanced current sensing
- Optimized pinout for board layout
- NTC for temperature control (UL 1434 CA 2 and 4)
Applications
- 3-phase inverters for motor drives
- Dish washers
- Refrigerator pressors
- Air-conditioning fans
- Draining and recirculation pumps
Description
This SLLIMM (small low-loss intelligent molded module) nano provides a pact, high-performance AC motor drive in a simple, rugged design. It is posed of six IGBTs and three half-bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is optimized for thermal performance and pactness in built-in motor applications, or other low power applications where assembly space is limited. This IPM includes an operational amplifier, pletely unmitted, and a parator that can be used to design a fast and efficient protection circuit. SLLIMM is a trademark of STMicroelectronics.
DS10102
- Rev 8
- December 2019 For further information contact your local STMicroelectronics sales office.
.st.
Internal schematic diagram and pin configuration
Internal schematic diagram and pin configuration
Figure 1. Internal schematic diagram
GND (1) T/ SD / OD (2)
Vcc W (3) HIN W (4) LIN W (5)
OP+ (6) OPOUT (7)
OP- (8) Vcc V (9) HIN V (10) LIN V (11)
CIN (12) Vcc U (13) HIN U (14) T / SD / OD (15) LIN U...
