STGIPQ4C60T-HZ
STGIPQ4C60T-HZ is 6A 600V IGBT manufactured by STMicroelectronics.
Features
- IPM 6 A, 600 V, 3-phase IGBT inverter bridge including 3 control ICs for gate driving and freewheeling diodes
- 3.3 V, 5 V, 15 V TTL/CMOS input parators with hysteresis and pull-down/ pull-up resistors
- Internal bootstrap diode
- Optimized for low electromagnetic interference
- Undervoltage lockout
- Short-circuit rugged TFS IGBT
- Shutdown function
- Interlocking function
- Op-amp for advanced current sensing
- parator for fault protection against overcurrent
- NTC (UL 1434 CA 2 and 4)
- Up to ±2 k V ESD protection (HBM C = 100 p F, R = 1.5 kΩ)
- Isolation ratings of 1800 Vrms/min.
- UL recognition: UL 1557, file E81734
Applications
- 3-phase induction motor (ACIM)
- Dishwasher
- Fans
- Kitchen hoods
- PMSM / BLDC motor control
- Refrigerators and freezers
Description
This second series of SLLIMM (small low-loss intelligent molded module) nano provides a pact, high-performance AC motor drive in a simple, rugged design. It is posed of six improved short-circuit rugged trench gate fieldstop IGBTs with freewheeling diodes and three half-bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is designed to allow a better and more easily screwed-on heat sink, and is optimized for thermal performance and pactness in built-in motor applications or other low power applications where assembly space is limited. This IPM includes a pletely unmitted operational amplifier and a parator that can be used to design a fast and efficient protection circuit.
DS13553
- Rev 4
- September 2023 For further information contact your local STMicroelectronics sales office.
.st.
Internal schematic diagram and pin configuration
Internal schematic diagram and pin configuration
Figure 1. Internal schematic diagram
GND (1) T/ SD / OD (2)
Vcc W (3) HIN W (4) LIN W (5)
OP+ (6) OPOUT (7)
OP- (8) Vcc V (9) HIN V (10) LIN V (11)
CIN (12) Vcc U (13) HIN U (14) T /...
