STIB1560DM2-L Datasheet | STMicroelectronics

Features - IPM 15 A, 600 V, 3-phase MOSFET inverter bridge including 2 control ICs for gate driving - 3.3 V, 5 V TTL/CMOS inputs with hysteresis - Internal bootstrap diode - Undervoltage lockout of gate drivers - Smart shutdown function - Short-circuit protection - Shutdown input/fault output - Separate open-source outputs - Built-in temperature sensor - parator for fault protection - Fast, soft recovery diodes - Fully isolated package - Isolation rating of 1500 Vrms/min - UL recognition: UL 1557, file E81734 Applications - 3-phase inverters for motor drives - Linear and BLDC pressor - Aircon Product status link STIB1560DM2-L Product summary Order code Marking IB1560DM2-L Package SDIP2B-26L type L3 Packing Tube Description This new IPM, belonging to the second series of SLLIMM (small low-loss intelligent molded module), provides a pact, high-performance AC motor drive in a simple, rugged design. It bines new ST proprietary control ICs with the high-voltage N-channel superjunction MDMesh DM2, providing fast-recovery diode series to increase efficiency and minimize EMI and overall losses, making it ideal for any high-efficiency converter and 3-phase inverter system. SLLIMM is a trademark of STMicroelectronics. DS13085 - Rev 1 - July 2019 For further information contact your local STMicroelectronics sales office. .st. Internal schematic and pin description 1 Internal schematic and pin description Figure 1. Internal schematic diagram and pin configuration NC (1) Vboot U (2) Vboot V (3) Vboot W (4) Hin U (5) Hin V (6) Hin W (7) Vcc H (8) GND...