Datasheet4U Logo Datasheet4U.com

STM32F031G4 - 32-bit MCU

Download the STM32F031G4 datasheet PDF. This datasheet also covers the STM32F031C4 variant, as both devices belong to the same 32-bit mcu family and are provided as variant models within a single manufacturer datasheet.

Description

.

.

.

12 3.1 ARM®-Cortex®-M0 core with embedded Flash and SRAM

.

Features

  • Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz.
  • Memories.
  • 16 to 32 Kbytes of Flash memory.
  • 4 Kbytes of SRAM with HW parity.
  • CRC calculation unit.
  • Reset and power management.
  • Digital and I/Os supply: 2.0 to 3.6 V.
  • Analog supply: VDDA = from VDD to 3.6 V.
  • Power-on/Power-down reset (POR/PDR).
  • Programmable voltage detector (PVD).
  • Low power modes: Sleep, Stop and Standby.
  • VBAT supply for RTC and bac.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (STM32F031C4-STMicroelectronics.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
STM32F103ZE ARM-CM3 Board User Manual EMBEST
STM301N N-Channel MOSFET SamHop Microelectronics
STM-1116 800 - 1000 MHz High Linearity Active Transmit Mixer ETC
STM-2016 1800 - 2200 MHz High Linearity Silicon Germanium Active Transmit Mixer Stanford Microdevices
STM-3116 High Linearity Active Transmit Mixer Sirenza Microdevices

Other Datasheets by STMicroelectronics

Part Number Description
STM32F031G6 32-bit MCU
STM32F031C4 32-bit MCU
STM32F031C6 32-bit MCU
STM32F031E6 32-bit MCU
STM32F031F4 32-bit MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STM32F031x4 STM32F031x6 ARM®-based 32-bit MCU with up to 32 Kbyte Flash, timers, ADC and communication interfaces, 2.0 - 3.6 V Datasheet - production data Features  Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz  Memories – 16 to 32 Kbytes of Flash memory – 4 Kbytes of SRAM with HW parity  CRC calculation unit  Reset and power management – Digital and I/Os supply: 2.0 to 3.6 V – Analog supply: VDDA = from VDD to 3.
Published: |