STM32F207VC Datasheet | STMicroelectronics

Features - Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1) - Memories - Up to 1 Mbyte of Flash memory - 512 bytes of OTP memory - Up to 128 + 4 Kbytes of SRAM - Flexible static memory controller that supports pact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes - Clock, reset and supply management - From 1.8 to 3.6 V application supply + I/Os - POR, PDR, PVD and BOR - 4 to 26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC - 32 k Hz oscillator for RTC with calibration - Internal 32 k Hz RC with calibration - Low-power modes - Sleep, Stop and Standby modes - VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM - 3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode - 2 × 12-bit D/A converters - General-purpose DMA: 16-stream controller with centralized FIFOs and burst support - Up to 17 timers - Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input - Debug mode: Serial wire debug (SWD), JTAG, and Cortex®-M3 Embedded Trace Macrocell™ &"'! LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm) LQFP144 (20 × 20mm) LQFP176 (24 × 24 mm) WLCSP64+2 (0.400 mm pitch) UFBGA176 (10 × 10 mm) - - Up to 140 I/O ports with interrupt capability: - Up to 136 fast I/Os up to 60 MHz - Up to 138 5 V-tolerant I/Os - Up to 15 munication interfaces - Up to three I2C interfaces (SMBus/PMBus) - Up to four USARTs and two UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, Ir DA, modem control) - Up to three SPIs (30 Mbit/s), two with muxed I2S to achieve audio class accuracy via audio PLL or external PLL - 2 × CAN interfaces (2.0B Active) - SDIO interface - Advanced connectivity - USB 2.0 full-speed device/host/OTG controller with on-chip PHY -...