STM32F358RC Datasheet | STMicroelectronics

Features - Core: ARM® Cortex®-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit). - Operating conditions: - VDD: 1.8V +/- 8% - VDDA voltage range: 1.65 to 3.6 V - Memories - 256 Kbytes of Flash memory - Up to 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes. - Routine bootster: 8 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM: Core Coupled Memory) - CRC calculation unit - Reset and supply management - Low-power modes: Sleep, and Stop - VBAT supply for RTC and backup registers - Clock management - 4 to 32 MHz crystal oscillator - 32 k Hz oscillator for RTC with calibration - Internal 8 MHz RC with x 16 PLL option - Internal 40 k Hz oscillator - Up to 86 fast I/Os - All mappable on external interrupt vectors - Several 5 V-tolerant - Interconnect matrix - 12-channel DMA controller - Up to four ADC 0.20 µS (up to 38 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 1.8 to 3.6 V - Up to two 12-bit DAC channels with analog supply from 2.4 to 3.6 V - Seven fast rail-to-rail analog parators with analog supply from 1.65 to 3.6 V - Up to four operational amplifiers that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V LQFP48 (7 × 7 mm) LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm) - Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors - Up to 13 timers - One 32-bit timer and two 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input - Up to two 16-bit 6-channel advancedcontrol timers, with up to 6 PWM channels, deadtime generation and emergency stop - One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation and emergency stop - Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop - 2 watchdog timers (independent, window) - Sys...