STM32G0B1VC Datasheet | STMicroelectronics

Features - Includes ST state-of-the-art patented technology - Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz - -40°C to 85°C/105°C/125°C operating temperature - Memories - Up to 512 Kbytes of flash memory with protection and securable area, two banks, read-while-write support - 144 Kbytes of SRAM (128 Kbytes with HW parity check) - CRC calculation unit - Reset and power management - Voltage range: 1.7 V to 3.6 V - Separate I/O supply pin (1.65 V to 3.6 V) - Power-on/Power-down reset (POR/PDR) - Programmable Brownout reset (BOR) - Programmable voltage detector (PVD) - Low-power modes: Sleep, Stop, Standby, Shutdown - VBAT supply for RTC and backup registers - Clock management - 4 to 48 MHz crystal oscillator - 32 k Hz crystal oscillator with calibration - Internal 16 MHz RC with PLL option (±1 %) - Internal 48 MHz RC oscillator - Internal 32 k Hz RC oscillator (±5 %) - Up to 94 fast I/Os - All mappable on external interrupt vectors - Multiple 5 V-tolerant I/Os - 12-channel DMA controller with flexible mapping - 12-bit, 0.4 µs ADC (up to 16 ext. channels) - Up to 16-bit with hardware oversampling - Conversion range: 0 to 3.6V - Two 12-bit DACs, low-power sample-and-hold - Three fast low-power analog parators, with programmable input and output, rail-to-rail - 15 timers (two 128 MHz capable): 16-bit for advanced motor control, one 32-bit and six 16bit general-purpose, two basic 16-bit, two lowpower 16-bit, two watchdogs, Sys Tick timer - Calendar RTC with alarm and periodic wakeup from Stop/Standby/Shutdown LQFP32 (7 × 7 mm) LQFP48 (7 × 7 mm) LQFP64 (10 × 10 mm) LQFP80 (12 × 12 mm) LQFP100 (14 × 14 mm) UFQFPN32 (5 × 5 mm) UFQFPN48 (7 × 7 mm) UFBGA64 (5 × 5 mm) UFBGA100 (7 × 7...