STM32G0C1CC
STM32G0C1CC is 32-bit MCU manufactured by STMicroelectronics.
Features
- Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz
- -40°C to 85°C/105°C/125°C operating temperature
- Memories
- Up to 512 Kbytes of Flash memory with protection and securable area, two banks, read-while-write support
- 144 Kbytes of SRAM (128 Kbytes with HW parity check)
- CRC calculation unit
- Reset and power management
- Voltage range: 1.7 V to 3.6 V
- Separate I/O supply pin (1.6 V to 3.6 V)
- Power-on/Power-down reset (POR/PDR)
- Programmable Brownout reset (BOR)
- Programmable voltage detector (PVD)
- Low-power modes:
Sleep, Stop, Standby, Shutdown
- VBAT supply for RTC and backup registers
- Clock management
- 4 to 48 MHz crystal oscillator
- 32 k Hz crystal oscillator with calibration
- Internal 16 MHz RC with PLL option (±1 %)
- Internal 48 MHz RC oscillator
- Internal 32 k Hz RC oscillator (±5 %)
- Up to 94 fast I/Os
- All mappable on external interrupt vectors
- Multiple 5 V-tolerant I/Os
- 12-channel DMA controller with flexible mapping
- 12-bit, 0.4 µs ADC (up to 16 ext. channels)
- Up to 16-bit with hardware oversampling
- Conversion range: 0 to 3.6V
- Two 12-bit DACs, low-power sample-and-hold
- Three fast low-power analog parators, with programmable input and output, rail-to-rail
- 15 timers (two 128 MHz capable): 16-bit for advanced motor control, one 32-bit and six 16bit general-purpose, two basic 16-bit, two lowpower 16-bit, two watchdogs, Sys Tick timer
- Calendar RTC with alarm and periodic wakeup from Stop/Standby/Shutdown
LQFP32 7 × 7 mm LQFP48 7 × 7 mm LQFP64 10 × 10 mm LQFP80 12 × 12 mm LQFP100 14 × 14 mm
UFQFPN32 5 × 5 mm
UFQFPN48 7 × 7 mm
UFBGA64 5 × 5 mm
UFBGA100 7 × 7 mm
WLCSP52 3.09 × 3.15 mm
- C- om Thmreuenic I2a Cti-obnusinitnetrefarfcaecses supporting Fastmode Plus (1 Mbit/s) with extra current sink, two supporting SMBus/PMBus and wakeup from Stop...