STM32G474PC Datasheet | STMicroelectronics

Features Includes ST state-of-the-art patented technology - Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions - Operating conditions: - VDD, VDDA voltage range: 1.71 V to 3.6 V - Mathematical hardware accelerators - CORDIC for trigonometric functions acceleration - FMAC: filter mathematical accelerator - Memories - 512 Kbytes of Flash memory with ECC support, two banks read-while-write, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP - 96 Kbytes of SRAM, with hardware parity check implemented on the first 32 Kbytes - Routine booster: 32 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM) - External memory interface for static memories FSMC supporting SRAM, PSRAM, NOR and NAND memories - Quad-SPI memory interface - Reset and supply management - Power-on/power-down reset (POR/PDR/BOR) - Programmable voltage detector (PVD) - Low-power modes: sleep, stop, standby and shutdown - VBAT supply for RTC and backup registers LQFP48 (7 x 7 mm) LQFP64 (10 x 10 mm) LQFP80 (12 x 12 mm) LQFP100 (14 x 14 mm) LQFP128 (14 x 14 mm) UFQFPN48 (7 x 7 mm) WLCSP81 (4.02 x 4.27 mm) UFBGA121 (6 x 6 mm) TFBGA100 (8 x 8 mm) - Clock management - 4 to 48 MHz crystal oscillator - 32 k Hz oscillator with calibration - Internal 16 MHz RC with PLL option (± 1%) - Internal 32 k Hz RC oscillator (± 5%) - Up to 107 fast I/Os - All mappable on external interrupt vectors - Several I/Os with 5 V tolerant capability - Interconnect matrix - 16-channel DMA controller - 5 x 12-bit ADCs 0.25 µs, up to 42 channels. Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range - 7 x 12-bit DAC channels - 3 x buffered external channels 1 MSPS - 4 x unbuffered internal channels 15 MSPS - 7 x ultra-fast rail-to-rail analog parators - 6 x operational amplifiers that can be used in...