STM32L010R8
Key Features
- Ultra-low-power platform - 1.8 V to 3.6 V power supply - -40 to 85 °C temperature range - 0.27 µA Standby mode (2 wakeup pins) - 0.4 µA Stop mode (16 wakeup lines) - 0.8 µA Stop mode + RTC + 8-Kbyte RAM retention - Down to 88 µA/MHz in Run mode - 5 µs wakeup time (from Flash memory) - 41 µA 12-bit ADC conversion at 10 ksps
- Core: Arm® 32-bit Cortex®-M0+ - From 32 kHz to 32 MHz - 0.95 DMIPS/MHz
- Reset and supply management - Ultra-low-power BOR (brownout reset) with 5 selectable thresholds - Ultra-low-power POR/PDR
- Clock sources - 0 to 32 MHz external clock - 32 kHz oscillator for RTC with calibration - High-speed internal 16 MHz factory-trimmed RC (±1%) - Internal low-power 37 kHz RC - Internal multispeed low-power 65 kHz to 4.2 MHz RC - PLL for CPU clock
- Pre-programmed bootloader - USART, SPI supported
- Development support - Serial wire debug supported
- Up to 51 fast I/Os (45 I/Os 5-Volt tolerant)
- Memories - 64-Kbyte Flash memory - 8-Kbyte RAM - 256 bytes of data EEPROM - 20-byte backup register - Sector protection against R/W operation
