STMicroelectronics STM32L010RB
The STM32L010RB provides high power efficiency over a wide performance range. This is achieved with a large choice of internal and external clock sources, internal voltage adaptation, and several low-power modes. The STM32L010RB offers several analog features: one 12-bit ADC with hardware oversampling, several timers, one low-power timer (LPTIM), three general-purpose 16-bit timers, one RTC and one SysTick that can be used as timebases.| Part No. | STM32L010RB |
|---|---|
| Datasheet | STM32L010RB Download |
| Manufacturer |  STMicroelectronics |
| Description | Value line ultra-low-power 32-bit MCU |
| Buy | Stock & Price |
FEATURES
● Ultra-low-power platform – 1.8 V to 3.6 V power supply – –40 to 85 °C temperature range – 0.29 µA Standby mode (2 wakeup pins) – 0.43 µA Stop mode (16 wakeup lines) – 0.86 µA Stop mode + RTC + 20-Kbyte RAM retention – Down to 93 µA/MHz in Run mode – 5 µs wakeup time (from Flash memory) – 41 µA 12-bit ADC conversion at 10 ksps● Core: Arm® 32-bit Cortex®-M0+ – From 32 kHz to 32 MHz – 0.95 DMIPS/MHz
● Reset and supply management – Ultra-low-power BOR (brownout reset) with 5 selectable thresholds – Ultra-low-power POR/PDR
● Clock sources – 0 to 32 MHz external clock – 32 kHz oscillator for RTC with calibration – High-speed internal 16 MHz factory-trimmed RC (±1%) – Internal low-power 37 kHz RC – Internal multispeed low-power 65 kHz to 4.2 MHz RC – PLL for CPU clock
● Pre-programmed bootloader – USART, I2C, SPI supported
● Development support – Serial wire debug supported
● 51 fast I/Os (45 I/Os 5-Volt tolerant)
● Memories – 128-Kbyte Flash memory – 20-Kbyte RAM – 512 bytes of d...
