STM32L083CZ Datasheet | STMicroelectronics

Features - Ultra-low-power platform - 1.65 V to 3.6 V power supply - -40 to 125 °C temperature range - 0.29 µA Standby mode (3 wakeup pins) - 0.43 µA Stop mode (16 wakeup lines) - 0.86 µA Stop mode + RTC + 20-Kbyte RAM retention - Down to 93 µA/MHz in Run mode - 5 µs wakeup time (from Flash memory) - 41 µA 12-bit ADC conversion at 10 ksps - Core: Arm® 32-bit Cortex®-M0+ with MPU - From 32 k Hz up to 32 MHz max. - 0.95 DMIPS/MHz - Memories - Up to 192-Kbyte Flash memory with ECC (2 banks with read-while-write capability) - 20-Kbyte RAM - 6 Kbytes of data EEPROM with ECC - 20-byte backup register - Sector protection against R/W operation - Up to 84 fast I/Os (78 I/Os 5V tolerant) - Reset and supply management - Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds - Ultra-low-power POR/PDR - Programmable voltage detector (PVD) - Clock sources - 1 to 25 MHz crystal oscillator - 32 k Hz oscillator for RTC with calibration - High speed internal 16 MHz factory-trimmed RC (+/- 1%) - Internal low-power 37 k Hz RC - Internal multispeed low-power 65 k Hz to 4.2 MHz RC - Internal self calibration of 48 MHz RC for USB - PLL for CPU clock - Pre-programmed bootloader - USB, USART supported - Development support - Serial wire debug supported - LCD driver for up to 4x52 or 8x48 segments FBGA FBGA LQFP48 (7 x 7 mm) LQFP64 (10x10 mm) LQFP100 (14x14...