STM32L152RCT6 Datasheet | STMicroelectronics

Features - Ultra-low-power platform - 1.65 V to 3.6 V power supply - -40 °C to 105 °C temperature range - 0.29µA Standby mode (3 wakeup pins) - 1.15 µA Standby mode + RTC - 0.44 µA Stop mode (16 wakeup lines) - 1.4 µA Stop mode + RTC - 8.6 µA Low-power run mode - 185 µA/MHz Run mode - 10 n A ultra-low I/O leakage - 8 µs wakeup time - Core: ARM® Cortex®-M3 32-bit CPU - From 32 k Hz up to 32 MHz max - 1.25 DMIPS/MHz (Dhrystone 2.1) - Memory protection unit - Reset and supply management - Low-power, ultrasafe BOR (brownout reset) with 5 selectable thresholds - Ultra-low-power POR/PDR - Programmable voltage detector (PVD) - Clock sources - 1 to 24 MHz crystal oscillator - 32 k Hz oscillator for RTC with calibration - High Speed Internal 16 MHz factory-trimmed RC (+/- 1%) - Internal Low-power 37 k Hz RC - Internal multispeed low-power 65 k Hz to 4.2 MHz PLL for CPU clock and USB (48 MHz) - Pre-programmed bootloader - USB and USART supported - Development support - Serial wire debug supported - JTAG and trace supported - Up to 83 fast I/Os (70 I/Os 5V tolerant), all mappable on 16 external interrupt vectors LQFP100 (14 × 14 mm) LQFP64 (10 × 10 mm) LQFP48 (7 x 7 mm) UFBGA100 WLCSP63 UFQFPN48 (7 x 7 mm) (0.4 mm pitch) (7x7 mm) - Memories - 256 Kbytes of Flash memory with ECC - 32 Kbytes of RAM - 8 Kbytes of true EEPROM with ECC - 128-byte backup register - LCD Driver (except STM32L151x C devices) up to 8x40 segments, contrast adjustment, blinking mode, step-up...