STMicroelectronics Electronic Components Datasheet

STM32MP153C Datasheet

Arm dual Cortex-A7 800MHz + Cortex-M4 MPU

No Preview Available !

STM32MP153C/F

Arm® dual Cortex®-A7 800 MHz + Cortex®-M4 MPU,

TFT, 37 comm. interfaces, 29 timers, adv. analog, crypto

Datasheet - production data

Features

Core

• 32-bit dual-core Arm® Cortex®-A7

– L1 32-Kbyte I / 32-Kbyte D for each core

– 256-Kbyte unified level 2 cache

– Arm® NEON™ and Arm® TrustZone®

• 32-bit Arm® Cortex®-M4 with FPU/MPU

– Up to 209 MHz (Up to 703 CoreMark®)

Memories

• External DDR memory up to 1 Gbyte

– up to LPDDR2/LPDDR3-1066 16/32-bit

– up to DDR3/DDR3L-1066 16/32-bit

• 708 Kbytes of internal SRAM: 256 Kbytes of

AXI SYSRAM + 384 Kbytes of AHB SRAM +

64 Kbytes of AHB SRAM in Backup domain

and 4 Kbytes of SRAM in Backup domain

• Dual mode Quad-SPI memory interface

• Flexible external memory controller with up to

16-bit data bus: parallel interface to connect

external ICs and SLC NAND memories with up

to 8-bit ECC

Security/safety

• Secure boot, TrustZone® peripherals, active

tamper

• Cortex®-M4 resources isolation

Reset and power management

• 1.71 V to 3.6 V I/Os supply (5 V-tolerant I/Os)

• POR, PDR, PVD and BOR

• On-chip LDOs (RETRAM, BKPSRAM, USB

1.8 V, 1.1 V)

• Backup regulator (~0.9 V)

• Internal temperature sensors

• Low-power modes: Sleep, Stop and Standby

LFBGA

TFBGA

LFBGA448 (18 × 18mm)

LFBGA354 (16 × 16mm)

Pitch 0.8mm

TFBGA361 (12 × 12 mm)

TFBGA257 (10 × 10 mm)

min Pitch 0.5mm

• DDR memory retention in Standby mode

• Controls for PMIC companion chip

Low-power consumption

• Total current consumption down to 2 µA

(Standby mode, no RTC, no LSE, no

BKPSRAM, no RETRAM)

Clock management

• Internal oscillators: 64 MHz HSI oscillator,

4 MHz CSI oscillator, 32 kHz LSI oscillator

• External oscillators: 8-48 MHz HSE oscillator,

32.768 kHz LSE oscillator

• 5 × PLLs with fractional mode

General-purpose input/outputs

• Up to 176 I/O ports with interrupt capability

– Up to 8 secure I/Os

– Up to 6 Wakeup, 3 tampers, 1 active

tamper

Interconnect matrix

• 2 bus matrices

– 64-bit Arm® AMBA® AXI interconnect, up to

266 MHz

– 32-bit Arm® AMBA® AHB interconnect, up

to 209 MHz

3 DMA controllers to unload the CPU

• 48 physical channels in total

• 1 × high-speed general-purpose master direct

memory access controller (MDMA)

February 2020

This is information on a product in full production.

DS12503 Rev 3

1/254

www.st.com

STMicroelectronics Electronic Components Datasheet

STM32MP153C Datasheet

Arm dual Cortex-A7 800MHz + Cortex-M4 MPU

No Preview Available !

STM32MP153C/F

• 2 × dual-port DMAs with FIFO and request

router capabilities for optimal peripheral

management

Up to 37 communication peripherals

• 6 × I2C FM+ (1 Mbit/s, SMBus/PMBus)

• 4 × UART + 4 × USART (12.5 Mbit/s, ISO7816

interface, LIN, IrDA, SPI slave)

• 6 × SPI (50 Mbit/s, including 3 with full duplex

I2S audio class accuracy via internal audio PLL

or external clock)

• 4 × SAI (stereo audio: I2S, PDM, SPDIF Tx)

• SPDIF Rx with 4 inputs

• HDMI-CEC interface

• MDIO Slave interface

• 3 × SDMMC up to 8-bit (SD / e•MMC™ / SDIO)

• 2 × CAN controllers supporting CAN FD

protocol, out of which one supports time-

triggered CAN (TTCAN)

• 2 × USB 2.0 high-speed Host

+ 1 × USB 2.0 full-speed OTG simultaneously

– or 1 × USB 2.0 high-speed Host

+ 1 × USB 2.0 high-speed OTG

simultaneously

• 10/100M or Gigabit Ethernet GMAC

– IEEE 1588v2 hardware,

MII/RMII/GMII/RGMII

• 8- to 14-bit camera interface up to 140 Mbyte/s

6 analog peripherals

• 2 × ADCs with 16-bit max. resolution (12 bits

up to 4.5 Msps, 14 bits up to 4 Msps, 16 bits up

to 3.6 Msps)

• 1 × temperature sensor

• 2 × 12-bit D/A converters (1 MHz)

• 1 × digital filters for sigma delta modulator

(DFSDM) with 8 channels/6 filters

• Internal or external ADC/DAC reference VREF+

Graphics

• LCD-TFT controller, up to 24-bit // RGB888

– up to WXGA (1366 × 768) @60 fps

– Two layers with programmable colour LUT

Up to 29 timers and 3 watchdogs

• 2 × 32-bit timers with up to 4 IC/OC/PWM or

pulse counter and quadrature (incremental)

encoder input

• 2 × 16-bit advanced motor control timers

• 10 × 16-bit general-purpose timers (including 2

basic timers without PWM)

• 5 × 16-bit low-power timers

• RTC with sub-second accuracy and hardware

calendar

• 2 × 4 Cortex®-A7 system timers (secure, non-

secure, virtual, hypervisor)

• 1 × SysTick M4 timer

• 3 × watchdogs (2 × independent and window)

Hardware acceleration

• AES 128, 192, 256, TDES

• HASH (MD5, SHA-1, SHA224, SHA256),

HMAC

• 2 × true random number generator

(3 oscillators each)

• 2 × CRC calculation unit

Debug mode

• Arm® CoreSight™ trace and debug: SWD and

JTAG interfaces

• 8-Kbyte embedded trace buffer

3072-bit fuses including 96-bit unique ID,

up to 1184-bit available for user

All packages are ECOPACK2 compliant

2/254

DS12503 Rev 3

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf

STM32MP153C Datasheet

Arm dual Cortex-A7 800MHz + Cortex-M4 MPU

STM32MP153C Datasheet

Arm dual Cortex-A7 800MHz + Cortex-M4 MPU

Similar Datasheet

Part Number Start With