STSPIN32G0251 Datasheet | STMicroelectronics

Features - Three-phase gate drivers - High-voltage rail up to 250 V - d V/dt transient immunity ±50 V/ns - Gate driving voltage range from 9 V to 20 V - Driver current capability: - 200/350 m A source/sink current @ 25 °C - 32-bit ARM® Cortex®-M0+ MCU core: - Up to 64 MHz clock frequency - 8-Kbyte SRAM with hardware parity check - 64-Kbyte flash memory with protection and securable area - CRC calculation unit - Up to 32 general-purpose I/O ports (GPIO) - 1 advanced timer for motor control, 16-bit with up to 6 x PWM channels - 5 general-purpose timers (1x 32-bit) - 2 low-power timers - 12-bit ADC converter (up to 15 channels) with 2 MSps conversion rate - 5-channel DMA controller with flexible mapping - Internal high precision voltage reference - Full set of interfaces: 2x I2C, 2x SPI, 3x UART and 1x low-power UART - Matched propagation delay for all channels - Integrated bootstrap diodes - parator for fast overcurrent protection - UVLO, interlocking, and deadtime functions - Smart shutdown (smart SD) function - Standby mode for low power consumption - On-chip debug support via SWD - Extended temperature range: -40 to +125 °C - QFN 10x10 72L pitch 0.5 creepage 1.8 mm package Applications - Three-phase motor drivers - Inverters - Industrial appliances and fans DS14504 - Rev 1 - December 2023 For further information contact your local STMicroelectronics sales office. .st. Description Description...