Datasheet4U Logo Datasheet4U.com

STUSB06E Datasheet 3.3 V Usb Transceiver

Manufacturer: STMicroelectronics

Overview: STUSB06E 3.3 V USB transceiver.

General Description

The STUSB06E is a single chip transceiver that plies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard.

It is powered by external 3.3 V supply and has an integrated 150 kΩ resistor to implement charger detection with weak pull-up method.

.DataSheet.net/ The STUSB06E also supports sharing mode when VREG is not present, which allows the D+/Dlines to be shared with other serial protocols.

Key Features

  • Compliant to USB v2.0 for full-speed (12 Mb/s) and low-speed (1.5 Mbps) operation HBM = ± 9 kV on D+, D- lines, ± 7 kV on VREG ± 6 kV ESD compliant to IEC-61000-4-2 on D+, D-, VREG lines Separate I/O supply with operation down to 1.6 V Integrated 150 kΩ switchable pull-up from D+ to VREG Supports host negotiation protocol (DP pull-up auto-connection after SE0) SEO active low interrupt in HNP mode (INT, VCC_IO referred) Very low p.

More Datasheets from STMicroelectronics

Part Number Description
STUSB02E USB Transceiver
STUSB03E USB Transceiver
STUSB1600 USB Type-C controller
STUSB1602 USB Type-C controller
STUSB4500 Standalone USB PD sink controller
STUSB4500L Standalone USB Type-C sink port controller
STUSB4700 Autonomous USB PD controller
STUSB4710 Autonomous USB PD controller
STUSB4761 Standalone USB PD controller
STUSBCD01B USB charger detection interface

STUSB06E Distributor