TLP200G Datasheet | STMicroelectronics

DESCRIPTION The TLPxx M/G/G-1 series are tripolar transient surge arrestors used for primary and secondary protectionin sensitive tele equipment. FEATURES TRIPOLAR CROWBAR PROTECTION RING VOLTAGE RANGE SELECTED TELE APPLICATIONS REPETITIVE PEAK PULSE CURRENT : IPP = 100 A (10 / 1000 µs) HOLDING CURRENT : IH = 150 m A LOW CAPACITANCE : C = 110 p F typ. D2PAK TLPxx G LOW LEAKAGE CURRENT : IR = 5 µA max BENEFITS No ageing and no noise. If destroyed, the TLPxx M/G/G-1 falls into short circuit, still ensuring protection. Access to Surface Mount applications thanks to the Power SO-10TM and D2PAK package. TIP GND RING I2PAK TLPxx G-1 TM: ASD and Power SO-10 are trademarks of ST Microelectronics. September 1998 - Ed : 3C 1/14 TLPxx M/G/G-1 PLIES WITH THE FOLLOWING STANDARDS: CCITT K20 VDE0433 VDE0878 IEC-1000-4-5 FCC Part 68, lightning surge type A FCC Part 68, lightning surge type B BELLCORE TR-NWT-001089 FIRST LEVEL BELLCORE TR-NWT-001089 SECOND LEVEL CNET I31-24 Peak Surge Voltage (V) 4000 4000 4000 level 4 level 4 1500 800 1000 2500 1000 5000 4000 Voltage Waveform (µs) 10/700 10/700 1.2/50 10/700 1.2/50 10/160 10/560 5/320 2/10 10/1000 2/10 0.5/700 Current Waveform (µs) 5/310 5/310 1/20 5/310 8/20 10/160 10/560 5/320 2/10 10/1000 2/10 0.8/310 Admissible Ipp (A) 100 100 100 100 100 200 100 25 500 100 500 100 Necessary Resistor (Ω) - TYPICAL APPLICATION Primary protection module TLPxx M/G/G-1 Analog Line Card Main Distribution Frame Analog line card protection - Vbat PTC LINE A TLPxx M/G/G-1 LCP1511D RING RELAY 220n F LINE B PTC SLIC 2/14 TLPxx M/G/G-1 TYPICAL APPLICATION ISDN: U interface protection TLPxx M/G/G-1 1/2 DA108S1...