Datasheet4U Logo Datasheet4U.com

TS4972 - 1.2W AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE HIGH

General Description

The TS4972 is an Audio Power Amplifier capable of delivering 1.6W of continuous RMS ouput power into a 4Ω load @ 5V.

This Audio Amplifier is exhibiting 0.1% distortion level (THD) from a 5V supply for a Pout = 250mW RMS.

An external standby mode control reduces the supply current to less than 10nA.

📥 Download Datasheet

Datasheet Details

Part number TS4972
Manufacturer STMicroelectronics
File Size 904.55 KB
Description 1.2W AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE HIGH
Datasheet download datasheet TS4972 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS4956 Stereo audio amplifier system ST Microelectronics
TS4004 Low-noise charge pump DC converter ETC
TS4054 500mA single-cell lithium battery charger Synmosaic
TS408 Classic temperature sensor TIANSOR
TS40P05G Glass Passivated Bridge Rectifiers Taiwan Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
TS4973 1.2W TWO AUDIO INPUTS WITH GAIN CONTROL POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW
TS4974 1W Differential Audio Power Amplifier
TS4975 Stereo Headphone Drive Amplifier
TS4900 300mW at 3.3V SUPPLY AUDIO POWER AMPLIFIER
TS4902 300mW at 3.3V SUPPLY AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS4972 1.2W AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE HIGH s OPERATING FROM VCC = 2.5V to 5.5V s RAIL TO RAIL OUTPUT s 1.2W OUTPUT POWER @ Vcc=5V, THD=1%, F=1kHz, with 8Ω Load MODE (10nA) PIN CONNECTIONS (Top View) TS4972JT - FLIP CHIP s ULTRA LOW CONSUMPTION IN STANDBY s 75dB PSRR @ 217Hz from 2.5 to 5V s LOW POP & CLICK s ULTRA LOW DISTORTION (0.05%) s UNITY GAIN STABLE s FLIP CHIP PACKAGE 8 x 300µm bumps DESCRIPTION The TS4972 is an Audio Power Amplifier capable of delivering 1.6W of continuous RMS ouput power into a 4Ω load @ 5V. This Audio Amplifier is exhibiting 0.1% distortion level (THD) from a 5V supply for a Pout = 250mW RMS. An external standby mode control reduces the supply current to less than 10nA. An internal shutdown protection is provided.