TS912, TS912A, TS912B
Rail-to-rail CMOS dual operational amplifier
■ Rail-to-rail input and output voltage ranges
■ Single (or dual) supply operation
from 2.7 to 16 V
■ Extremely low input bias current: 1 pA typ.
■ Low input offset voltage: 2 mV max.
■ Specified for 600 Ω and 100 Ω loads
■ Low supply current: 200 μA/amplifier
(VCC = 3 V)
■ Latch-up immunity
■ ESD tolerance: 3 kV
■ Spice macromodel included in this specification
■ See TS56x series for better accuracy and
The TS912 device is a rail-to-rail CMOS dual
operational amplifier designed to operate with
a single or dual supply voltage.
The input voltage range Vicm includes the two
supply rails VCC+ and VCC-.
The output reaches VCC- +30 mV, VCC+ -40 mV,
with RL = 10 kΩ and VCC- +300 mV,
VCC+ -400 mV, with RL = 600 Ω.
This product offers a broad supply voltage
operating range from 2.7 to 16 V and a supply
current of only 200 μA/amp. (VCC = 3 V).
Source and sink output current capability is
typically 40 mA (at VCC = 3 V), fixed by an internal
Datasheet −production data
Pin connections (top view)
This is information on a product in full production.
Doc ID 2325 Rev 7