TS914 Datasheet | STMicroelectronics

® TS914 RAIL TO RAIL CMOS QUAD OPERATIONAL AMPLIFIER - . . RAIL TO RAIL INPUT AND OUTPUT VOLTAGE RANGES SINGLE (OR DUAL) SUPPLY OPERATION FROM 2.7V TO 16V EXTREMELY LOW INPUT BIAS CURRENT : 1pA TYP LOW INPUT OFFSET VOLTAGE : 5mV max. SPECIFIED FOR 600Ω AND 100Ω LOADS LOW SUPPLY CURRENT : 200µA/Ampli SPICE MACROMODEL INCLUDED IN THIS SPECIFICATION N DIP14 (Plastic Package) D SO14 (Plastic Micropackage) ORDER CODES Part Number TS914I/AI Temperature Range -40, +125 C o Package N - D - PIN CONNECTIONS (top view) DESCRIPTION The TS914 is a RAIL TO RAIL quad CMOS operational amplifier designed to operate with a single or dual supply voltage. The input voltage range Vicm includes the two supply rails VCC+ and VCC-. The output reaches : - VCC- +50mV VCC+ -50mV with RL = 10kΩ - VCC- +350mV VCC+ -350mV with RL = 600Ω This product offers a broad supply voltage operating range from 2.7V to 16V and a supply current of only 200µA/amp. (VCC = 3V). Source and sink output current capability is typically 40mA (at VCC = 3V), fixed by an internal limitation circuit. STMicroelectronics is offering a dual op-amp with the same Features : TS912. April 1999 Output 1 Inverting Input 1 Non-inve rtin g Input 1 V CC + Non-inve rting Input 2 Invert ing Input 2 Output 2 1 2 3 4 5 6 7 + + + + 14 13 12 11 10 9 8 Output 4 Invertin g Input 4 Non-inve rtin g Input 4 VCC Non-inve rtin g Input 3 Invertin g Input 3 Output 3 1/13 TS914 SCHEMATIC DIAGRAM (1/4 TS914) VCC Non-inverting Input Inte rnal Vre f Inverting Input O...