Datasheet4U Logo Datasheet4U.com

TS914A - Rail-to-rail CMOS quad operational amplifier

General Description

The TS914 device is a rail-to-rail CMOS quad operational amplifier designed to operate with a single or dual supply voltage.

The input voltage range Vicm includes the two supply rails VCC+ and VCC-.

Key Features

  • Rail-to-rail input and output voltage ranges.
  • Single (or dual) supply operation from 2.7 to 16 V.
  • Extremely low input bias current: 1 pA typical.
  • Low input offset voltage: 5 mV max. (A grade).
  • Specified for 600 Ω and 100 Ω loads.
  • Low supply current: 200 μA/ampli. (VCC = 3 V).
  • Latch-up immunity.
  • Spice macromodel included in this specification Related products.
  • See TS56x series for better accuracy and smaller packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS914 RAIL TO RAIL CMOS QUAD OPERATIONAL AMPLIFIER ST Microelectronics
TS912 Rail-to-rail CMOS dual operational amplifier ST Microelectronics
TS912S6 LOW LOSS SUPER HIGH SPEED RECTIFIER Fuji Electric
TS9001 300mA CMOS Low Dropout Voltage Regulator Taiwan Semiconductor Company
TS9001 1.6V Nanopower Comparator Touchstone Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
TS912A Rail-to-rail CMOS dual operational amplifier
TS912B Rail-to-rail CMOS dual operational amplifier
TS924A Rail-to-rail output current quad operational amplifier
TS9511 Precision rail-to-rail input/output 3 MHz single operational amplifier
TS982 dual bipolar operational amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS914, TS914A Rail-to-rail CMOS quad operational amplifier Features ■ Rail-to-rail input and output voltage ranges ■ Single (or dual) supply operation from 2.7 to 16 V ■ Extremely low input bias current: 1 pA typical ■ Low input offset voltage: 5 mV max. (A grade) ■ Specified for 600 Ω and 100 Ω loads ■ Low supply current: 200 μA/ampli. (VCC = 3 V) ■ Latch-up immunity ■ Spice macromodel included in this specification Related products ■ See TS56x series for better accuracy and smaller packages Description The TS914 device is a rail-to-rail CMOS quad operational amplifier designed to operate with a single or dual supply voltage. The input voltage range Vicm includes the two supply rails VCC+ and VCC-.