VND9012AJ
VND9012AJ is Double channel high-side driver manufactured by STMicroelectronics.
Features
Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Standby current (max)
VCC VCC RON ILIMH ISTBY
36 V 4 to 28 V
12 mΩ 63 A 0.5 µA
Power SSO-16
Product status link VND9012AJ
Product summary
Order code
VND9012AJTR
Package
Power SSO-16
Packing
Tape and reel
- AEC-Q100 qualified
- Extreme low voltage operation for deep cold cranking applications (pliant with LV124, revision 2013)
- General
- Double channel smart high-side driver with current sense analog feedback
- Very low standby current
- patible with 3 V and 5 V CMOS outputs
- Current sense diagnostic functions
- Multiplexed analog feedback of load current with high precision proportional current mirror
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to VCC detection
- Sense enable/disable
- Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
- Loss of ground and loss of VCC
- Reverse battery through self turn-on
- Electrostatic discharge protection
Applications
- Automotive resistive, inductive and capacitive loads
- Protected supply for ADAS systems: radars and sensors
DS12727...
