Datasheet4U Logo Datasheet4U.com

SP1821 - Four Channels Constant Current LED Driver

Description

The SP1821 is a linear constant current driver designed to drive multiple LEDs in series from a high input voltage rail.

The driver acts as a high current matched, four-channel current source ensuring constant LED current for a range of input voltages.

Features

  • z Low Cost LED Driver z Constant Current Output z Four Channels LED Driver Provides Matching LED Current z Low Quiescent Current z Disconnects LEDs in Shutdown Mode z Thermal Shut Down Protection z Current Adjustable via external resistor z Dimming Control thru either Enable or Iset PIN.

📥 Download Datasheet

Datasheet preview – SP1821

Datasheet Details

Part number SP1821
Manufacturer SYNC POWER
File Size 246.14 KB
Description Four Channels Constant Current LED Driver
Datasheet download datasheet SP1821 Datasheet
Additional preview pages of the SP1821 datasheet.

📁 Similar Datasheet

  • SP1848 - Thermoelectric Cooler (Marlow)
  • SP100-1 - Pressure Sensor Series (Sensonor)
  • SP100-15 - Pressure Sensor Series (Sensonor)
  • SP100-1T - Pressure Sensor Series (Sensonor)
  • SP100-2 - Pressure Sensor Series (Sensonor)
  • SP100-2T - Pressure Sensor Series (Sensonor)
  • SP100-4F - Skeleton AC Fan (SUNON)
  • SP1002 - TVS Diode Array (Littelfuse)
  • SP1005-01ETG - TVS Diode (Leiditech)
  • SP1007 - TVS Diode (Littelfuse)
Other Datasheets by SYNC POWER
  • SP1820 - Four Channels Constant Current LED Driver
  • SP1937 - DC-DC Step-Up Converter
  • SP1938 - DC-DC Step-Up Converter

Full PDF Text Transcription

Click to expand full text
SP1821 Four Channels Constant Current LED Driver DESCRIPTION The SP1821 is a linear constant current driver designed to drive multiple LEDs in series from a high input voltage rail. The driver acts as a high current matched, four-channel current source ensuring constant LED current for a range of input voltages. The device can drive up to 25mA load current per string with an external resistor. The SP1821 can provide lowest cost for various applications. Internal thermal protection automatically turns off LED current to prevent overheating. The dimming can be achieved by controlling the ISET input or by feeding a PWM signal to the EN pin. The device can be shut down by setting Enable low.
Published: |