Datasheet4U Logo Datasheet4U.com

SP3406 - 600mA Buck Converter

Description

SP3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture.

The device is available in an adjustable version and fixed output voltages, such as 1.5V,1.8V,etc.

Features

  • High Efficiency: Up to 96%; 1.5MHz Constant Switching Frequency; 600mA Output Current at Vin=3V; Integrated Main Switch and Synchronous Rectifier, No Schottky Diode Required; 2.5 to 6.5V input voltage; Output Voltage as Low as 0.6V; 100% Duty Cycle in Dropout; Quiescent Current: 30uA(input.

📥 Download Datasheet

Datasheet preview – SP3406

Datasheet Details

Part number SP3406
Manufacturer SYNC POWER
File Size 233.98 KB
Description 600mA Buck Converter
Datasheet download datasheet SP3406 Datasheet
Additional preview pages of the SP3406 datasheet.

📁 Similar Datasheet

  • SP34063A - 1.5A Buck/Boost/Inverting DC-DC Regulator (Exar)
  • SP34063A - 1.5A Buck/Boost/Inverting DC-DC Switching Regulator (Sipex Corporation)
  • SP3400 - Diode Array (Littelfuse)
  • SP3401 - 18kV Diode Array (Littelfuse)
  • SP3420 - 6A Diode Array (Littelfuse)
  • SP3422 - TVS Diode Arrays (Littelfuse)
  • SP3481 - +3.3V Low Power Half-Duplex RS-485 Transceivers with 10Mbps Data Rate (Sipex)
  • SP3483 - 3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (MaxLinear)
  • SP3483 - +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (Exar)
  • SP3483 - +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver (Sipex)
Other Datasheets by SYNC POWER

    Full PDF Text Transcription

    Click to expand full text
    SP3406 600mA Buck Converter DESCRIPTION SP3406 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version and fixed output voltages, such as 1.5V,1.8V,etc. Supply current with no load is 30uA and drops to <1uA in shutdown. The 2.5 to 6.5V input voltage range makes the SP3406 ideally suitable for single Li-Ion, two to four AA battery-powered applications. In low dropout operation mode, the duty cycle can reach to 100%, extending battery life in portable systems. PWM pulse skipping mode operation provides very low output ripple voltage for noise sensitive applications. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors.
    Published: |