SP986 Datasheet | SYNC POWER

DESCRIPTION The SP986 is a dual channel, push-pull driver that is suited to drive transformers. The push and pull driver duties are balanced with a preset dead time of about 220ns. During the dead time, both drivers are in the pulling state with output at GND. Push and pull drivers have a peak current capability of 1A. The applications of push and pull driver include high/low side bridge converters with single or dual output transformers. It would provide the users a superior AC/DC power application with higher efficiency and lower standby power. With low external ponent counts, SP986 is a low cost solution for the applications. SP986 is available in either SOT-23-6L or DFN3x3 package. APPLICATIONS - AC/DC Switching Power Adaptor - Battery Charger - Open-Frame Switching Power Supply - LED Power Supply FEATURES - 220n S Dead Time - Soft Start - OTP with Hysteresis - 1A Driving Capability - SOT23-6L and DFN3x3-6 Package PIN CONFIGURATION SOT23-6 DFN3x3-6 PART MARKING SOT-23-6L DFN3x3-6 2023/03/21 V.1.3 Page 1 High-Low Side Transformer Driver TYPICAL APPLICATION CIRCUIT PIN DESCRIPTION Pin Symbol OUTA Output A Description GND Ground OUTB Output B SEL Frequency Selection, Default Frequency @500KHz When Floating Enable Enable Output when Floating VCC Supply Voltage ORDERING INFORMATION Part...