Datasheet4U Logo Datasheet4U.com

SPE1211 - Single-Line ESD Protection Array

General Description

The SPE1211 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Key Features

  • Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) ‹ Protects single I/O lines ‹ Working voltage: 12V ‹ Low leakage current ‹ Low operating and clamping voltages ‹ www. DataSheet4U. com PIN.

📥 Download Datasheet

Datasheet Details

Part number SPE1211
Manufacturer SYNC POWER
File Size 188.04 KB
Description Single-Line ESD Protection Array
Datasheet download datasheet SPE1211 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SPE10S60F-A Intelligent Power Module SPE
SPE10S60F-A IPM JILIN SINO
SPE10S60H-A Intelligent Power Module JILIN SINO
SPE15S60F-A Intelligent Power Module 600V/15A 3-phase full bridge drive SPE
SPE-EWN1-03-N3-MT 6.0x5.0mm Tri-Chip Surface Mount LEDs Marktech Optoelectronics

Other Datasheets by SYNC POWER

Part Number Description
SPE1212 2-Line ESD Protection Array
SPE1225 5-Line ESD Protection Array
SPE1244 3-Line ESD Protection Array
SPE0311 Single-Line ESD Protection Array
SPE0332 2-Line ESD Protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SPE1211 Single-Line ESD Protection Array DESCRIPTION The SPE1211 are designed by TVS device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. SPE1211 will protect single line, and may be used on line where the signal polarities swing above and below ground. SPE1211 offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. SPE1211 may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SOD-523 package makes them ideal for use in portable electronics such as cell phones, PDA’s, notebook computers, and digital cameras.