900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Samtec

179-XXXXX-XXXXXX-XXX Datasheet Preview

179-XXXXX-XXXXXX-XXX Datasheet

CABLE

No Preview Available !

REVISION T
DO NOT
SCALE FROM
THIS PRINT
*
T
*
*
*
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES] CABLE CALLOUT
RF179-XXXXX-XXXXXX-XXXX
OVERALL CABLE LENGTH
FIG 2
179: CCA-179 (RG-179 COAXIAL CABLE)
MILLIMETERS OF CABLE
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
(SEE TABLE 1)(SEE NOTE 12,13,14,15)
"A" mm
C
"B" mm
"C" mm
"D" mm
C
"E" mm
C
END 1 CONNECTOR
-72SP: MCX7-P-C-XX-ST-CA3 (SEE SHEET 2)
-72RP: MCX7-P-C-XX-RA-CA3 (SEE SHEET 2)
-74SP: BNC7T-P-C-XX-ST-CA3 (SEE SHEET 2)
-74BJ: BNC7T-J-C-XX-ST-BH3 (SEE SHEET 2)
-77SP: SMB7H-P-C-XX-ST-CA3 (SEE SHEET 2)
-77RP: SMB7H-P-C-XX-RA-CA3 (SEE SHEET 2)
-D4SP: BNC7T-P-C-XX-ST-CA3D (SEE SHEET 3)
-78SP: DIN7A-PP-C-XX-ST-CA3 (SEE SHEET 3)
-79SP: MBNC7-P-C-XX-ST-CA3 (SEE SHEET 3)
-79RP: MBNC7-P-C-XX-RA-CA3 (SEE SHEET 3)
T
*
*
*
-7GSP:
-7GSJ:
-7VRP:
GRF7-P-C-XX-ST-CA3 (SEE SHEET 3)
GRF7-J-C-XX-ST-CA3 (SEE SHEET 4)
GRF7V-P-C-XX-RA-CA3 (SEE SHEET
4)
* -7VSJ: GRF7V-J-C-XX-ST-CA3 (SEE SHEET 4)
0100 MIN. (SEE NOTE 8 & 9)
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD / NICKEL COMBINATION
3: ALTERNATE GOLD / NICKEL
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
5: ALTERNATE GOLD / GOLD / NICKEL
6: ALTERNATE H GOLD / H GOLD / NICKEL
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
(SEE SHEET 2 AND 3 FOR PLATING SPECIFICS)
(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
END 2 CONNECTOR OR PREPARATION
-72SP: MCX7-P-C-XX-ST-CA3 (SEE SHEET 2)
-72RP: MCX7-P-C-XX-RA-CA3 (SEE SHEET 2)
END 1 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD / NICKEL COMBINATION
3: ALTERNATE GOLD / NICKEL
4: ALTERNATE GOLD / GOLD FLASH / NICKEL
5: ALTERNATE GOLD / GOLD / NICKEL
6: ALTERNATE H GOLD / H GOLD / NICKEL
8. ALTERNATE HEAVY GOLD / GOLD FLASH /NICKEL
(SEE SHEET 2 AND 3 FOR PLATING SPECIFICS)
T
T * = NOT RELEASED FOR PRODUCTION
-74SP: BNC7T-P-C-XX-ST-CA3 (SEE SHEET 2)
-74BJ: BNC7T-J-C-XX-ST-BH3 (SEE SHEET 2)
-77SP: SMB7H-P-C-XX-ST-CA3 (SEE SHEET 2)
-77RP: SMB7H-P-C-XX-RA-CA3 (SEE SHEET 2)
-D4SP: BNC7T-P-C-XX-ST-CA3D (SEE SHEET 3)
-78SP: DIN7A-PP-C-XX-ST-CA3 (SEE SHEET 3)
-79SP: MBNC7-P-C-XX-ST-CA3 (SEE SHEET 3)
-79RP: MBNC7-P-C-XX-RA-CA3 (SEE SHEET 3)
*
*
*
*
-7GSP: GRF7-P-C-XX-ST-CA3 (SEE SHEET 3)
-7GSJ: GRF7-J-C-XX-ST-CA3 (SEE SHEET 4)
-7VRP: GRF7V-P-C-XX-RA-CA3 (SEE SHEET 4)
-7VSJ: GRF7V-J-C-XX-ST-CA3 (SEE SHEET 4)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE
11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
SEE NOTES 11-15 &17, SHEET 2, FIG. 3)
(SEE FIG. 2) "C" FORMAT: X.X
(SEE FIG. 2) "B" FORMAT: X.X
(SEE FIG. 2) "A" FORMAT: X.X
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9.
T * = NOT RELEASED FOR PRODUCTION
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2)
(SEE TABLE 1 FOR SUBTRACTORS)
C 3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS
C 4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1
5. AFTER FINAL ELECTRICAL TEST, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL-ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS.
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.
LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS
9. CABLE LENGTHS LONGER THAN 500 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA
10. MINIMUM BEND RADIUS FOR RG179 = 10.2 [.40].
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C
16. CONNECTORS TO BE ORIENTED ACCORDING TO CO-HD-WI-3048-M.
17. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED.
C
FIG 1
RF179-72SPX-72RPX-XXXX SHOWN
CABLE STRIPPING DIMENSIONS
PER END 1 AND END 2 ASSEMBLY PRINTS
OR STRIPPED AND TINNED
(SEE NOTES 11-15, SHEET 2, FIG. 3)
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
F:\DWG\MISC\MKTG\RF179-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS
ANGLES
.X: 0.3 [.01]
2
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
MATERIAL:
DO NOT SCALE DRAWING
SEE END 1 AND END 2 ASSEMBLY PRINTS
SHEET SCALE: 2:1 DESCRIPTION:
RF179 CABLE ASSEMBLY
DWG. NO.
RF179-XXXXX-XXXXXX-XXXX
BY: B. RAY
1-30-2007 SHEET 1 OF 4




Samtec

179-XXXXX-XXXXXX-XXX Datasheet Preview

179-XXXXX-XXXXXX-XXX Datasheet

CABLE

No Preview Available !

REVISION T
-72SP
(STRAIGHT PLUG)
(USE DRAWING No. MCX7-P-C-XX-ST-CA3
FOR ASSEMBLY INSTRUCTIONS)
-72RP
(RIGHT ANGLE PLUG)
(USE DRAWING No. MCX7-P-C-XX-RA-CA3
FOR ASSEMBLY INSTRUCTIONS)
-74SP
(STRAIGHT PLUG)
(USE DRAWING No. BNC7T-P-C-XX-ST-CA3
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MCX7-P-C-H-ST-CA3)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MCX7-P-C-HN-ST-CA3)
NOTE: ALL CRITICAL DIMENSIONS ON MCX7-P-C-XX-ST-CA3
THAT APPLY MUST BE VERIFIED.
-77SP
(STRAIGHT PLUG)
(USE DRAWING No. SMB7H-P-C-XX-ST-CA3
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: MCX7-P-C-H-RA-CA3)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: MCX7-P-C-HN-RA-CA3)
NOTE: ALL CRITICAL DIMENSIONS ON MCX7-P-C-XX-RA-CA3
THAT APPLY MUST BE VERIFIED.
-77RP
(RIGHT ANGLE PLUG)
(USE DRAWING No. SMB7H-P-C-XX-RA-CA3
FOR ASSEMBLY INSTRUCTIONS)
PLATING
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC7T-P-C-GN-ST-CA3)
NOTE: ALL CRITICAL DIMENSIONS ON BNC7T-P-C-XX-ST-CA3
THAT APPLY MUST BE VERIFIED.
-74BJ
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. BNC7T-J-C-XX-ST-BH3
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMB7H-P-C-H-ST-CA3)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMB7H-P-C-HN-ST-CA3)
NOTE: ALL CRITICAL DIMENSIONS ON SMB7H-P-C-XX-ST-CA3
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMB7H-P-C-H-RA-CA3)
2: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: SMB7H-P-C-HN-RA-CA3)
NOTE: ALL CRITICAL DIMENSIONS ON SMB7H-P-C-XX-RA-CA3
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC7T-J-C-HN-ST-BH3)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: BNC7T-J-C-GN-ST-BH3)
NOTE: ALL CRITICAL DIMENSIONS ON BNC7T-J-C-XX-ST-BH3
THAT APPLY MUST BE VERIFIED.
F:\DWG\MISC\MKTG\RF179-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
RF179 CABLE ASSEMBLY
DWG. NO.
RF179-XXXXX-XXXXXX-XXXX
BY: B. RAY
1-30-2007 SHEET 2 OF 4


Part Number 179-XXXXX-XXXXXX-XXX
Description CABLE
Maker Samtec
PDF Download

179-XXXXX-XXXXXX-XXX Datasheet PDF






Similar Datasheet

1 179-XXXXX-XXXXXX-XXX CABLE
Samtec





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy