900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Samtec

RF058-XXXXX-XXXXXX-X Datasheet Preview

RF058-XXXXX-XXXXXX-X Datasheet

CABLE

No Preview Available !

REVISION Q
DO NOT
SCALE FROM
THIS PRINT
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
RF058-XXXXX-XXXXXX-XXXX
FIG 2
CABLE STRIPPING DIMENSIONS
PER CONFIGURATIONS
(SEE TABLE 1)(SEE NOTES 12,13,14,15)
"A" mm
C
"B" mm
"C" mm
"D" mm
C
"E" mm
C
CABLE CALLOUT
058: CCA-058 (RG-58 COAXIAL CABLE)
END 1 CONNECTOR
-05SR: TNC-P-C-XX-SR-C10 (SEE SHEET 2)
-06SP: NTPE-P-C-XX-ST-C10 (SEE SHEET 2)
-01BJ: SMA-J-C-XX-ST-B10 (SEE SHEET 2)
-01SB: SMA-J-C-XX-ST-S10 (SEE SHEET 2)
-01SP: SMA-P-C-XX-ST-C10 (SEE SHEET 2)
END 1 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD/NICKEL
3: ALTERNATE GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
(SEE SHEET 2 FOR PLATING SPECIFICS)
OVERALL CABLE LENGTH
MILLIMETERS OF CABLE
0100 MIN. (SEE NOTE 8 & 9)
END 2 PLATING OPTION
1: GOLD ALL COMPONENTS
2: GOLD/NICKEL
3: ALTERNATE GOLD / NICKEL
7. ALTERNATE GOLD MEDIUM/ GOLD FLASH
(SEE SHEET 2 FOR PLATING SPECIFICS)
(LEAVE BLANK FOR -SING OR -XXXXXX
END 2 PREPARATION)
END 2 CONNECTOR OR PREPARATION
-05SR: TNC-P-C-XX-SR-C10 (SEE SHEET 2)
-06SP: NTPE-P-C-XX-ST-C10 (SEE SHEET 2)
-01BJ: SMA-J-C-XX-ST-B10 (SEE SHEET 2)
-01SB: SMA-J-C-XX-ST-S10 (SEE SHEET 2)
-01SP: SMA-P-C-XX-ST-C10 (SEE SHEET 2)
-SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11)
-XXXXXX: STRIPPED AND TINNED (THIS END ONLY-
SEE NOTES 11-16 & SHEET 2, FIG. 3)
(SEE FIG. 2) "C" FORMAT: X.X mm
(SEE FIG. 2) "B" FORMAT: X.X mm
(SEE FIG. 2) "A" FORMAT: X.X mm
DO NOT LEAVE ANY SPACE BLANK,
EACH MUST CONTAIN A
NUMERIC CHARACTER 0 THRU 9.
NOTES:
1. C REPRESENTS A CRITICAL DIMENSION
2. CABLE CUT LENGTH:
= (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2).
(SEE TABLE 1 FOR SUBTRACTORS)
C 3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS
C 4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1 AND THE TEST VOLTAGE FOR THE
ASSEMBLY SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING.
5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET
6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS
7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.
LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE.
8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS
9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA
10. MINIMUM BEND RADIUS FOR RG058 = 48.3 [1.90]
11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED
ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF.
12. DIM "A", "B", AND "C" HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mm
13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A
14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B
15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C
16. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED
17. CONNECTOR TO BE ORIENTED ACCORDING TO CO-HD-WI-3048-M.
C
FIG 1
RF058-05SRX-06SPX-XXXX SHOWN
F:\DWG\MISC\MKTG\RF058-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS
ANGLES
.X: 0.3 [.01]
2
.XX: 0.13 [.005]
.XXX: 0.051 [.0020]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MATERIAL:
DO NOT SCALE DRAWING
SEE END 1 AND END 2 ASSEMBLY PRINTS
SHEET SCALE: 2:1
Pb
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
RF058 CABLE ASSEMBLY
DWG. NO.
RF058-XXXXX-XXXXXX-XXXX
BY: TIM P.
5/6/2005 SHEET 1 OF 2




Samtec

RF058-XXXXX-XXXXXX-X Datasheet Preview

RF058-XXXXX-XXXXXX-X Datasheet

CABLE

No Preview Available !

REVISION Q
-05SR
(STRAIGHT PLUG)
(USE DRAWING No. TNC-P-C-XX-SR-C10
FOR ASSEMBLY INSTRUCTIONS)
-06SP
(STRAIGHT PLUG)
(USE DRAWING No. NTPE-P-C-XX-ST-C10
FOR ASSEMBLY INSTRUCTIONS)
-01BJ
(STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMA-J-C-XX-ST-B10
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTION
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: TNC-P-C-GN-SR-C10)
NOTE: ALL CRITICAL DIMENSIONS ON TNC-P-C-XX-SR-C10
THAT APPLY MUST BE VERIFIED.
-01SB
(SEALED STRAIGHT BULKHEAD JACK)
(USE DRAWING No. SMA-J-C-XX-ST-S10
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
2: 30μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-P-C-HN-ST-C10)
3: 10μ" MIN. GOLD CENTER CONTACT
100μ" MIN. NICKEL OUTER CONTACT
100μ" MIN. NICKEL REMAINING METAL PARTS
(END CONNECTOR P/N: NTPE-P-C-GN-ST-C10)
NOTE: ALL CRITICAL DIMENSIONS ON NTPE-P-C-XX-ST-C10
THAT APPLY MUST BE VERIFIED.
-01SP
(STRAIGHT PLUG)
(USE DRAWING No. SMA-P-C-XX-ST-C10
FOR ASSEMBLY INSTRUCTIONS)
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-B10)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-GF-ST-B10)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-XX-ST-B10
THAT APPLY MUST BE VERIFIED.
FIG.3
RF058-05SRX-102148-XXXX SHOWN
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-H-ST-S10)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-J-C-GF-ST-S10)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-J-C-XX-ST-S10
THAT APPLY MUST BE VERIFIED.
PLATING OPTIONS
1: 30μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-P-C-H-ST-C10)
7: 10μ" MIN. GOLD CENTER CONTACT
3μ" MIN. GOLD OUTER CONTACT
3μ" MIN. GOLD REMAINING METAL PARTS
(END CONNECTOR P/N: SMA-P-C-GF-ST-C10)
NOTE: ALL CRITICAL DIMENSIONS ON SMA-P-C-XX-ST-C10
THAT APPLY MUST BE VERIFIED.
F:\DWG\MISC\MKTG\RF058-XXXXX-XXXXXX-XXXX-MKT.SLDDRW
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 1:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
RF058 CABLE ASSEMBLY
DWG. NO.
RF058-XXXXX-XXXXXX-XXXX
BY: TIM P.
5/6/2005 SHEET 2 OF 2


Part Number RF058-XXXXX-XXXXXX-X
Description CABLE
Maker Samtec
PDF Download

RF058-XXXXX-XXXXXX-X Datasheet PDF






Similar Datasheet

1 RF058-XXXXX-XXXXXX-X CABLE
Samtec
2 RF058-XXXXX-XXXXXX-XXXX CABLE
Samtec





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy