Datasheet4U Logo Datasheet4U.com

BL0200C - High Efficiency

Download the BL0200C datasheet PDF. This datasheet also covers the BL0202C variant, as both devices belong to the same high efficiency family and are provided as variant models within a single manufacturer datasheet.

General Description

BL0200 series are 2ch output LED driver IC for LED backlight, and it can do dimming to 0.02 % by external PWM signal.

This IC realizes a high efficiency by the boost convertor control that absorbs variability on VF.

Key Features

  • and Benefit Boost convertor.
  • Current-Mode type PWM Control.
  • PWM frequency is 100 kHz o r 200 kHz.
  • Maximum On Duty is 90 % LED current control.
  • Individual PWM Dimming Control.
  • Analog Dimming.
  • High contrast ratio is 1 / 5000.
  • Accuracy of Reg output voltage is ± 1.5 % or ± 2 % Protection functions.
  • Enable Function of IC (BL0202B, BL0202C).
  • Error Signal Output (BL0200C).
  • Overcurrent Protection for Boost Circuit (OCP) ---------------------------------.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BL0202C-Sanken.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number BL0200C
Manufacturer Sanken
File Size 607.01 KB
Description High Efficiency
Datasheet download datasheet BL0200C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BL02 CMOS Gate Array AMI
BL022A Wideband LNA Gain Block BeRex
BL02RN1 On-Board Type (DC) EMI Suppression Filters Murata
BL0102-14-34 26mm LED CLUSTER Kingbright Corporation
BL0305 Digital Echo Shanghai Belling

Other Datasheets by Sanken

Part Number Description
BL0202B High Efficiency
BL0202C High Efficiency

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Efficiency For LED Backlight 2ch LED Driver IC BL0200 Series General Descriptions BL0200 series are 2ch output LED driver IC for LED backlight, and it can do dimming to 0.02 % by external PWM signal. This IC realizes a high efficiency by the boost convertor control that absorbs variability on VF. The product easily achieves high cost-performance LED drive system with few external components and enhanced protection functions. Package SOP18 Features and Benefit Boost convertor ● Current-Mode type PWM Control ● PWM frequency is 100 kHz o r 200 kHz ● Maximum On Duty is 90 % LED current control ● Individual PWM Dimming Control ● Analog Dimming ● High contrast ratio is 1 / 5000 ● Accuracy of Reg output voltage is ± 1.