SIM6811M Datasheet | Sanken

Description The SIM6800M/MV series are high voltage 3-phase motor drivers in which transistors, a pre-drive circuit, and bootstrap circuits (diodes and resistors) are highly integrated. These products can run on a 3-shunt current detection system and optimally control the inverter systems of lowto medium-capacity motors that require universal input standards. Features - Built-in Bootstrap Diodes with Current Limiting Resistors (60 Ω) - CMOS-patible Input (3.3 V or 5 V) - Pb-free (Ro HS pliant) - Isolation Voltage: 1500 V (for 1 min) UL-recognized ponent (File No.: E118037) (SIM6880M UL Recognition Pending) - Fault Signal Output at Protection Activation (FO Pin) - High-side Shutdown Signal Input (SD Pin) - Protections Include: Overcurrent Limit (OCL): Auto-restart Overcurrent Protection (OCP): Auto-restart Undervoltage Lockout for Power Supply High-side (UVLO_VB): Auto-restart Low-side (UVLO_VCC): Auto-restart Thermal Shutdown (TSD): Auto-restart Typical Application (SIM6811M, SIM6812M) VCC1 17 1 16 HIN3 HIN3 15 HIN2 HIN2 14 HIN1 HIN1 13 SD 12 LIN3 LIN2 LIN1 5V RFO Fault OCL 10 LIN3 9 LIN2 8 LIN1 7 2 6 VCC2 5 FO 4 OCP 3 LS1 11 LS2 2 RO LS3A...