Datasheet4U Logo Datasheet4U.com

LA4445 - 5.5W 2-Channel AF Power Amplifier

Description

of External Parts C1 (C2) : Feedback capacitor Low cutoff frequency fL depends on this feedback capacitor.

Increasing the capacitor value makes the starting time later C3 (C4) : Bootstrap capacitor If the capacitor value is decreased, the output at low frequencies goes lower.

Features

  • Dual channels. Output : 5.5W×2 (typ. ).
  • Minimun number of external parts required.
  • Small pop noise at the time of power supply ON/OFF and good starting balance.
  • Good ripple rejection : 46dB (typ. ).
  • Good channel separation.
  • Small residual noise (Rg=0).
  • Built-in protectors. a. Thermal protector b. Overvoltage, surge protector c. Adjacent pins (9-10, 9-8) short protector Package Dimensions unit:mm 3049A-SIP12H [LA4445] 27.0 20.0 4.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number:ENN1277E Monolithic Linear IC LA4445 5.5W 2-Channel AF Power Amplifier Features • Dual channels. Output : 5.5W×2 (typ.) • Minimun number of external parts required. • Small pop noise at the time of power supply ON/OFF and good starting balance. • Good ripple rejection : 46dB (typ.) • Good channel separation. • Small residual noise (Rg=0). • Built-in protectors. a. Thermal protector b. Overvoltage, surge protector c. Adjacent pins (9-10, 9-8) short protector Package Dimensions unit:mm 3049A-SIP12H [LA4445] 27.0 20.0 4.0 7.0 1.0min 1 2.5 2.0 0.5 1.0 12 6.0 13.2max 8.4 R1.7 11.8 0.4 2.
Published: |