LB1909MC Datasheet | SANYO

Features - Wide supply voltage range : 2.5V to 16V - Low saturation voltage : VO(sat) = 0.25V typ at IO = 200m A. - Built-in shoot-through current protection circuit. - No standby current consumption (or zero). - Built-in thermal shutdown circuit. - Small package : SOIC10 Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Maximum power source voltage Applied output voltage Applied input voltage GND pin outflow current Allowable power consumption Operating temperature Storage temperature Symbol VCC max VOUT max VIN max IGND Pd max Topr Tstg Mounted on the specified board - Conditions Ratings -0.3 to +20 -0.3 to +20 -0.3 to +18 800 820 -30 to +85 -40 to +150 Unit V V V m A m W °C °C - Specified board: 114.3mm × 76.1mm × 1.6mm, glass epoxy board. Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, munication...