LB1934T
LB1934T is 3V Camera 1.5-Channel Driver manufactured by SANYO.
Overview
The LB1934T is a low-voltage, low-saturation forward/ reverse driver IC with built-in 1.5-channel bridge. Its pact, low-profile package makes it ideal for use in pact cameras powered by 3V lithium batteries. Using direct microcontroller drive, it is possible to control standby, forward rotation, reverse rotation, and braking of two motors for film rewind and lens drive by means of only three control signals. The 0.5-channel section of the 1.5channel bridge can be divided into sink/source output, allowing configurations such as 1-channel bridge + sink output + source output.
Package Dimensions unit:mm 3246-TSSOP20
[LB1934T]
20 11
0.5 4.4 6.4 0.08 (1.0) 1.2max
Features
- Low voltage drive possible. When using same power supply for V CC and V S : VCC=VS=1.4V min. When using separate power supply for VCC and VS : VS=1.0V min., VCC=1.4V min.
- Low saturation voltage : residual voltage (upper side transistor + lower side transistor) =0.5V typ. at Io=1A.
- Zero power dissipation in standby mode.
- Direct microcontroller drive possible (any strength relationships of voltage supported between microcontroller control signal and VCC or VS).
- Logic power supply and motor power supply can be supplied at separate pins.
- Built-in thermal protection circuit.
- Number of control signals can be optimized for the set. “2-motor control” or “1-motor + 2-load control” can be implemented by 3 control signals. In addition to the above, 4 control signals allow implemention of a “input ignore mode” where two control signals are used in conjunction with other IC input signals.
- Built-in spark killer diode.
- pact, low-profile package (TSSOP-20 ; thickness=1.1 mm typ.)
0.65 (0.33)
SANYO : TSSOP20
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure...
