Datasheet4U Logo Datasheet4U.com

LC709201F - Battery Monitor

General Description

- power pin + power pin Reset pin Test pin

Connect an external 100kΩ pull-down resistor.

Set high when reading in the temperature, held low at other times.

Key Features

  • Accuracy of remaining battery power level measurement.
  • Accuracy of ±5% during discharging from 100% to 0% (at an ambient operating temperature of 0°C to 50°C).
  • Measurement of remaining battery power level.
  • The remaining power level is measured four times a second and calculated with each measurement undertaken.
  • Interface.
  • I2Cbus, communication in slave mode up to 100kHz supported.
  • Ports.
  • I2C-bus communication pin.
  • Battery temperat.

📥 Download Datasheet

Full PDF Text Transcription for LC709201F (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for LC709201F. For precise diagrams, and layout, please refer to the original PDF.

Ordering number : ENA2031 LC709201F CMOS IC Battery Monitor IC Overview The LC709201F is an IC that measures the remaining power level of 1-cell lithium-ion secondary bat...

View more extracted text
measures the remaining power level of 1-cell lithium-ion secondary batteries by monitoring the battery voltage without an external sense resistor, and detects the remaining battery power level by current prediction. It monitors the battery voltage and realizes a function that precisely measures the remaining battery charge. In addition, the IC realizes the function for calculating the remaining battery power level even more accurately by utilizing a temperature correction function that makes use of the temperature input from a thermistor.