Datasheet4U Logo Datasheet4U.com

LE24162LBXA - Two Wire Serial Interface EEPROM

General Description

C C BA 0.80mm × 1.20mm × 0.33mm PIN.A1 PIN.A2 PIN.B1 PIN.B2 PIN.C1 PIN.C2 VDD VSS WP VSS SCL SDA Block Diagram Power supply Ground Write protect pin Ground Serial clock input Serial data input/output Write controller High voltage generator WP Input Buffer SCL EEPROM Array X decoder Ad

Key Features

  • o acknowledge signals are generated. SDA Start Stop Memory Add.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE24162LBXA Two Wire Serial Interface EEPROM ON Semiconductor
LE24163LBXA 16kb I2C CMOS Serial EEPROM ON Semiconductor
LE2416DXA EEPROM ON Semiconductor
LE2416RDXA EEPROM ON Semiconductor
LE2416RLBXA Two Wire Serial Interface EEPROM ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE2416RLBXA Two Wire Serial Interface EEPROM
LE25FV055T 512K-bit (64K x 8) Serial Flash Memory
LE28DW3212AT-80B 32 Megabit FlashBank Memory
LE28DW8102T 8 Megabit FlashBank Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENA2071 LE24162LBXA CMOS IC Two Wire Serial Interface EEPROM (16k EEPROM) Overview The LE24162LBXA is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by incorporating SANYO’s high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol; therefore it is best suited for application that requires small-scale re-writable nonvolatile parameter memory. Functions • Capacity: 16k bits (2k × 8 bits) • Single supply voltage: 1.7V to 3.6V (to read) • Operating temperature: -40 to +85ºC • Interface: Two wire serial interface (I2C Bus*) • Operating clock frequency: 400kHz • Low power consumption : Standby: 2μA (max) : Active (Read): 0.