LA73031V Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA0240 Monolithic Linear IC LA73031V Overview For DVD Recorder Video Signal Input Switch This LA73031V is a video signal input switch for DVD recorder. Functions - Six input switches × one channel - Five input switches × two channels - Keyed clamp - 6dB amplifier - 6MHz low pass filter - Video signal detection - posite sync output - Standby mode Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta ≤ 75°C ∗ Conditions Ratings 7.0 780 -20 to +75 -40 to +150 Unit V mW °C °C ∗ When mounted on a 114.3×76.1×1.6mm3 glass epoxy resin. Remended Operating Conditions at Ta = 25°C Parameter Remending operation voltage Operating voltage range Input pin voltage application range Symbol VCC VCC opr VIN Conditions Ratings 5.0 4.75 to 5.25 -0.3 to VCC opr + 0.3 Unit V V V Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or...