Datasheet4U Logo Datasheet4U.com

LB11690H - Pre-Driver IC for Brushless Motor Drive in Electric Bicycles

Download the LB11690H datasheet PDF. This datasheet also covers the LB11690 variant, as both devices belong to the same pre-driver ic for brushless motor drive in electric bicycles family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • Three-phase bipolar PWM drive (high and low side n-channel FET drive).
  • Maximum supply voltage: 45 V.
  • Gate drive voltage: about 10 V (high and low side n-channel FETs).
  • Hall sensor signal F/V conversion circuit (one-shot multivibrator output).
  • Synthesized three-phase Hall sensor signal output.
  • Built-in current limiter and undervoltage protection circuits 0.51min 0.48 1.78 (1.04) SANYO: DIP30SD (400 mil) 3235A-HSOP36 [LB11690H] 0.65 17.8.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LB11690_SanyoSemiconDevice.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LB11693H 3-Phase Brushless Motor Driver ON Semiconductor
LB11696V Direct PWM Drive Brushless Motor Predriver Sanyo
LB11696V Direct PWM Drive Brushless Motor Predriver ON Semiconductor
LB11697V Direct PWM Drive Brushless Motor Predriver ON Semiconductor
LB11600JV Brushless Motor Predriver IC ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LB11690 Pre-Driver IC for Brushless Motor Drive in Electric Bicycles
LB11691 Monolithic digital IC Pre-Driver IC
LB11691H Monolithic digital IC Pre-Driver IC
LB11692JH Monolithic Digital IC 24V Fan Motor Driver IC
LB11693 Three-Phase Brushless Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENN7543 www.DataSheet4U.com Monolithic digital IC LB11690, 11690H Pre-Driver IC for Brushless Motor Drive in Electric Bicycles Overview The LB11690 and LB11690H are three-phase bipolar PWM drive pre-driver ICs that allow the output circuits to be implemented using only n-channel FETs. These ICs can implement, at low cost, high-efficiency drive circuits in applications that use motors that require high drive currents. These ICs include a built-in Hall sensor signal F/V conversion circuit and can provide a voltage that is proportional to motor speed for use, for example, in speedometers for electric bicycles. These ICs also support use in applications that holds the speed controlled at a constant rate as the load varies.