Datasheet4U Logo Datasheet4U.com

LC7573N - Electronic Volume Control

Description

1.

Consider the examples shown in Figure 4, where data is set up so that the segment outputs S1 to S19 output a low level on the G1 digit output timing and a high level on the G2 digit output timing.

(Here, the G2 side being lighted) 2.

Features

  • 38 segment outputs.
  • Noise reduction circuits are built into the output drivers.
  • Serial data input supports CCB.
  • format communications with the system controller.
  • Switching between digital and analog dimmers under serial data control.
  • High generality since display data is displayed without the intervention of a decoder.
  • All segments can be turned off with the BLK pin SANYO: DIP30S.
  • CCB is a trademark of SANYO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC75700T Key Scan IC ON Semiconductor
LC75 1500 Watt Low Capacitance Transient Voltage Suppressor Microsemi
LC7500 Electronic Volume Controller Sanyo Electric
LC75055PE Car Audio DSP ON Semiconductor
LC75056PE Car Audio DSP ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC7573N 1/2 Duty VFD Driver
LC7573NM 1/2 Duty VFD Driver
LC7573 Electronic Volume Control
LC7570 Static Drivers
LC7570E Static Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN*3587B CMOS LSI LC7573N, 7573NM 1/2 Duty VFD Driver for Frequency Display Preliminary Overview The LC7573N and LC7573NM are 1/2 duty VFD drivers that can be used for electronic tuning frequency display and other applications under the control of a controller. These products can directly drive VFDs with up to 38 segments. Package Dimensions unit: mm 3061-DIP30S [LC7573N] Features • 38 segment outputs • Noise reduction circuits are built into the output drivers. • Serial data input supports CCB* format communications with the system controller.
Published: |