900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Sanyo Electric Components Datasheet

LC87F5N62B Datasheet

8-bit 1-chip Microcontroller

No Preview Available !

www.DataSheet.co.kr
Ordering number : ENA1035
LC87F5N62B
CMOS IC
FROM 66K byte, RAM 2048 byte on-chip
8-bit 1-chip Microcontroller
Overview
The SANYO LC87F5N62B is an 8-bit microcomputer that, centered around a CPU running at a minimum bus cycle time
of 83.3ns, integrate on a single chip a number of hardware features such as 66K-byte flash ROM (onboard rewritable),
2048byte RAM, Onchip debugging function, sophisticated 16-bit timers/counters (may be divided into 8-bit timers), a
16-bit timer/counter (may be divided into 8-bit timers/counters or 8-bit PWMs), four 8-bit timers with a prescaler, a base
timer serving as a time-of-day clock, a high-speed clock counter, two synchronous SIO ports (with automatic block
transmission/reception capabilities), an asynchronous/synchronous SIO port, two UART ports (full duplex), four 12-bit
PWM channels, an 8-bit 15-channel AD converter, a system clock frequency divider, and a 29-source 10-vector interrupt
feature.
Features
„Flash ROM
Capable of on-board-programing with wide range, 2.7 to 5.5V, of voltage source
Block-erase in 128-byte units
67584 × 8 bits ( Address: 00000H to 0FFFFH, 1F800H to 1FFFFH)
„RAM
2048 × 9 bits
„Minimum Bus Cycle Time
83.3ns (12MHz)
125ns (8MHz)
500ns (2MHz)
VDD=2.8 to 5.5V
VDD=2.5 to 5.5V
VDD=2.2 to 5.5V
Note: Bus cycle time indicates the speed to read ROM.
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
Ver.1.00
31908HKIM 20080117-S00006 No. A1035-1/25
Datasheet pdf - http://www.DataSheet4U.net/


Sanyo Electric Components Datasheet

LC87F5N62B Datasheet

8-bit 1-chip Microcontroller

No Preview Available !

www.DataSheet.co.kr
„Minimum Instruction Cycle Time (tCYC)
250ns (12MHz)
375ns (8MHz)
1.5μs (2MHz)
VDD=2.8 to 5.5V
VDD=2.5 to 5.5V
VDD=2.2 to 5.5V
LC87F5N62B
„Ports
Normal withstand voltage I/O ports
Ports whose I/O direction can be designated in 1-bit units
Ports whose I/O direction can be designated in 2-bit units
Ports whose I/O direction can be designated in 4-bit units
Normal withstand voltage input port
Dedicated oscillator ports
Reset pins
Power pins
64 (P1n, P2n, P3n, P70 to P73, P8n, PAn, PBn, PCn,
S2Pn, PWM0, PWM1, XT2)
16 (PEn, PFn)
8 (P0n)
1 (XT1)
2 (CF1, CF2)
1 (RES)
8 (VSS1 to VSS4, VDD1 to VDD4)
„Timers
Timer 0: 16-bit timer/counter with a capture register
Mode 0: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture registers) ×2 channels
Mode 1: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture registers)
+ 8-bit counter (with an 8-bit capture registers)
Mode 2: 16-bit timer with an 8-bit programmable prescaler (with 16-bit capture registers)
Mode 3: 16-bit counter (with 16-bit capture registers)
Timer 1: 16-bit timer/counter that support PWM/toggle output
Mode 0: 8-bit timer with an 8-bit prescaler (with toggle outputs) + 8-bit timer/counter(with toggle outputs)
Mode 1: 8-bit PWM with an 8-bit prescaler × 2 channels
Mode 2: 16-bit timer/counter with an 8-bit prescaler (with toggle outputs)
(toggle outputs also from the lower-order 8-bits)
Mode 3: 16-bit timer with an 8-bit prescaler (with toggle outputs) (The lower-order 8 bits can be used as PWM.)
Timer 4: 8-bit timer with a 6-bit prescaler
Timer 5: 8-bit timer with a 6-bit prescaler
Timer 6: 8-bit timer with a 6-bit prescaler (with toggle outputs)
Timer 7: 8-bit timer with a 6-bit prescaler (with toggle outputs)
Base timer
1) The clock is selectable from the subclock (32.768kHz crystal oscillation), system clock, and timer 0 prescaler
output.
2) Interrupts programmable in 5 different time schemes.
„High-speed Clock Counter
1) Can count clocks with a maximum clock rate of 24MHz (at a main clock of 12MHz).
2) Can generate output real-time.
„SIO
SIO0: 8-bit synchronous serial interface
1) LSB first/MSB first mode selectable
2) Built-in 8-bit baudrate generator (maximum transfer clock cycle = 4/3 tCYC)
3) Automatic continuous data transmission (1 to 256 bits, specifiable in 1-bit units, suspension and resumption of
data transmission possible in 1-byte units)
SIO1: 8-bit asynchronous/synchronous serial interface
Mode 0: Synchronous 8-bit serial I/O (2- or 3-wire configuration, 2 to 512 tCYC transfer clocks)
Mode 1: Asynchronous serial I/O (half-duplex, 8 data bits, 1 stop bit, 8 to 2048 tCYC baudrates)
Mode 2: Bus mode 1 (start bit, 8 data bits, 2 to 512 tCYC transfer clocks)
Mode 3: Bus mode 2 (start detect, 8 data bits, stop detect)
SIO2: 8 bit synchronous serial interface
1) LSB first mode
2) Built-in 8-bit baudrate generator (maximum transfer clock cycle = 4/3 tCYC)
3) Automatic continuous data transmission (1 to 32 bytes)
No.A1035-2/25
Datasheet pdf - http://www.DataSheet4U.net/


Part Number LC87F5N62B
Description 8-bit 1-chip Microcontroller
Maker Sanyo Semicon Device
Total Page 25 Pages
PDF Download

LC87F5N62B Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 LC87F5N62B 8-bit 1-chip Microcontroller
Sanyo Semicon Device
2 LC87F5N62B 8-bit 1-chip Microcontroller
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy