LV25400W Datasheet | SANYO

.DataSheet.co.kr Ordering number : E- NA0633A Bi-CMOS LSI LV25400W Overview For Automotive Applications DSP Tuner Front End The LV25400W is a tuner front end IC that supports the Sanyo SDRS400 car radio DSP. The LV25400W supports worldwide radio standards including the FM bands used in US, Europe, and Japan as well as the LW, MW, SW, and FM weather bands. It adopts an image canceling mixer for the FM mixer and incorporates a fast PLL locking function to support RDS. The LV25400W also supports automatic alignment using CCB bus control. It requires external EEPROM. The LV25400W can implement a DSP tuner at low cost with a minimal number of external ponents. Functions - AM, FM, FE, IF, and PLL circuits Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Symbol VCC 8V VCC 5V CCB bus maximum input voltage CCB bus maximum output voltage Allowable power dissipation Operating temperature Storage temperature VIN max VO Pd max Topr Tstg Conditions OSC_VCC (2), FE_VCC (58) XTAL_VCC (13), VCCD (22), VCCA (40) Pin 18, 19, 20 Pin 21 Ta ≤ 85°C - 1 Ratings 9.0 6.0 -0.3 to +5.0 -0.3 to +6.5 840 -40 to +85 -50 to +125 Unit V V V V mW °C °C - 1 : Ratings vary with characteristics of the circuit board (materials, size, etc.) on which the device is to be mounted. - - CCB is a registered trademark of SANYO Electric Co., Ltd. CCB is SANYO Semiconductor's original bus format. All bus addresses are managed by SANYO Semiconductor for this format. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, munication device, office equipment, industrial equipment etc.). The products mentioned herein shall...