LV5692P Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA1876B LV5692P Overview Monolithic Linear IC For Car Audio Systems Multi-Power Supply System IC LV5692P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5 systems of voltage regulator pre-driver for P-FET which generates USB power and a high side switch for external devices. The following protection circuits are integrated: over current protector, overvoltage protector and Thermal Shut Down. This IC is suitable for use in car audio with USB port. Features - Five channel regulator and one channel P-FET pre-driver (for USB-power) For VDD: VOUT is 3.3V, IOmax is 300mA For DSP: VOUT is 3.3V, IOmax is 300mA For CD: VOUT is 8.0V, IOmax is 1300mA For illumination: VOUT is 8.4V, IOmax is 500mA For audio systems: VOUT is 8.4V, IOmax is 500mA For USB (controller), VOUT is flexible (configurable with external resistor), IOmax is 1000mA - High side switch: Voltage difference between input and output is 0.5V, IOmax is 500mA - Over current protector - Overvoltage protector (Without VDD-OUT) Clamp voltage is 21V (typical) - Thermal Shut down 175ºC (typical) - Quiescent current 50μA (Typ. when only VDD is in operation) (Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may degrade the IC’s reliability and eventually damage the IC. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for...