LV5695P Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA1972A Monolithic Linear IC LV5695P Overview For Car Audio Systems Multi-Power Supply System IC LV5695P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5 systems of voltage regulator pre-driver which a high side switch for external devices. The following protection circuits are integrated: over current protector, overvoltage protector and Thermal Shut Down. Features - Quiescent current 50μA (Typ. when only VDD is in operation) - Five channel regulator For VDD: VOUT is 5.0V/3.3V(Operation always), IOmax is 300mA For SWD5V: VOUT is 5.0V, IOmax is 500mA For CD: VOUT is 8.0V, IOmax is 2000mA For illumination: VOUT is 8.5V, IOmax is 500mA For audio systems: VOUT is 8.45V, IOmax is 800mA - Two high side switch: AMP: Voltage difference between input and output is 0.5V, IOmax is 500mA ANT: Voltage difference between input and output is 0.5V, IOmax is 350mA - Over current protector - Overvoltage protector (Without VDD-OUT) Clamp voltage is 28V (typical) - Thermal Shut down 175ºC (typical) - Pch-LDMOS is used for power output block. (Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may degrade the IC’s reliability and eventually damage the IC. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,...