LV8402GP Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA1960 LV8402GP Overview Bi-CMOS IC 2ch Forward/Reverse Motor Driver LV8402GP is a 2ch forward/reverse motor driver IC using D-MOS FET for output stage. As MOS circuit is used, it supports the PWM input. Its Features are that the on resistance (0.75Ω typ) and current dissipation are low. It also provides protection functions such as heat protection circuit and reduced voltage detection and is optimal for the motors that need high-current. Functions - 2ch forward/reverse motor driver. - Built-in low voltage reset and thermal shutdown circuit. - Low power consumption. - 4 mode function forward/reverse, brake and standby. - Low-temperature resistance 0.75Ω. - Built-in charge pump. - Built-in EXTRA mode for PWM port reduction when a motor drives by two phase excitation. Specifications Maximum Ratings at Ta = 25°C, SGND = PGND = 0V Parameter Power supply voltage (for load) Power supply voltage (for control) Output current Output peak current Input voltage Allowable power dissipation Operating temperature Storage temperature Symbol VM max VCC max IO max IO peak VIN max Pd max Topr Tstg Mounted on a specified board- t ≤ 10ms Conditions Ratings -0.5 to 16.0 -0.5 to 6.0 1.4 2.5 -0.5 to VCC+0.5 1050 -30 to +85 -55 to +150 Unit V V A A V mW °C °C - Specified board : 40.0mm × 50.0mm × 0.8mm, 4 Layer glass epoxy board. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, munication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,...