LV8773 - PWM Constant-Current Control Stepping Motor Driver

Sanyo Semicon Device

The LV8773 by Sanyo Semicon Device is a PWM Constant-Current Control Stepping Motor Driver. Below is the official datasheet preview.

Datasheet Details

Part number	LV8773
Manufacturer	Sanyo Semicon Device
File Size	254.34 KB
Description	PWM Constant-Current Control Stepping Motor Driver
Datasheet	LV8773_SanyoSemiconDevice.pdf
Additional preview pages of the LV8773 datasheet.

of operation (1) Chip enable function This IC is switched between standby and operating mode by setting the ST pin.

BiCDMOS process IC.
Low on resistance (upper side : 0.3Ω ; lower side : 0.25Ω ; total of upper and lower : 0.55Ω ; Ta = 25°C, IO = 2A).
Motor current selectable in two steps.
Output short-circuit protection circuit (selectable from latch-type or auto-reset-type) incorporated.
Unusual condition warning output pins.
No control power supply required Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage Output peak curre.

📁 LV8773 Similar Datasheet

LV8771VH - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)
LV8702V - PWM Current Control High-efficient Stepper Motor Driver (ON Semiconductor)
LV8711T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)
LV8714TA - Dual Stepper Motor Driver (ON Semiconductor)
LV8726TA - Stepper Motor Pre-Driver (ON Semiconductor)
LV8728MR - Stepper Motor Driver (ON Semiconductor)
LV8729V - PWM Constant-Current Control Stepper Motor Driver (ON Semiconductor)
LV8731V - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

Other Datasheets by Sanyo Semicon Device

Published: Jan 5, 2012 |