LV8860V Datasheet | SANYO

.DataSheet.co.kr Ordering number : ENA1818A Bi-CMOS IC LV8860V Overview Fan Motor Driver Single-Phase Full-Wave Driver LV8860V is a driver IC used for single-phase fan motor. High-efficiency and low-noise are realized by reducing reactive power using Silent PWM. The operating range of LV8860V is wide. LV8860V also corresponds to 24V. Therefore, it is optimal for office automation equipment and factory automation equipment. Functions - Single-phase full wave operation by Silent PWM drive. - Speed is controllable by PWM input. - Hall bias output pin. - Integrated Quick Start Circuit. - FG (rotation detection) / RD (lock detection) output pin (open drain output) - Integrated current limiter circuit (limit at IO=450mA with Rf=0.5Ω connection, limit value is determined based on Rf.) - Integrated lock protector circuit and automatic recovery circuit. - Integrated thermal shut-down (TSD) circuit. Specifications Parameter Maximum Ratings at Ta = 25°C Symbol VCC max IOUT max VOUT max VRD/FG max IRD/FG max IRGL max IHB max Conditions Ratings 36 0.7 36 36 10 5 10 Unit V A V V mA mA mA Maximum supply voltage OUT pin output current Output withstand RD/FG output pin withstand RD/FG output maximum current RGL output maximum current HB output maximum current Continued on next page. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high...